Coleman Super Saver

[pgrzes]

Anyone have a Kleenrite part number for a weep solenoid on a super saver pump stand. I am assuming its a gc? 3/8" N.O. but I cannot seem to find one that appears to be whats on there.

 

[Randy]

Anyone have a Kleenrite part number for a weep solenoid on a super saver pump stand. I am assuming its a gc? 3/8" N.O. but I cannot seem to find one that appears to be whats on there.

If you own any Coleman equipment you might want to stock up on any proprietary parts. I heard the other day that Coleman was about to take its last breath.

 

[Greg Pack]

If you own any Coleman equipment you might want to stock up on any proprietary parts. I heard the other day that Coleman was about to take its last breath.

Hmm, I thought they were doing OK. They are selling some Hanna equipment locally

 

[Greg Pack]

Anyone have a Kleenrite part number for a weep solenoid on a super saver pump stand. I am assuming its a gc? 3/8" N.O. but I cannot seem to find one that appears to be whats on there.

Are you sure it is 3/8? I thought it was 1/2" If so:

https://www.kleen-ritecorp.com/p-30436-gc-12-24v-normally-open-solenoid-valve.aspx

 

[OurTown]

If you own any Coleman equipment you might want to stock up on any proprietary parts. I heard the other day that Coleman was about to take its last breath.

Did you hear it from a distributor? That's pretty big news.

 

[Randy]

Did you hear it from a distributor? That's pretty big news.

That would be correct. The Self-serve car wash industry is a slowly dying business model.

 

[OurTown]

That would be correct. The Self-serve car wash industry is a slowly dying business model.

They do make tunnel equipment and IBAs but I don't see very many new ones being installed. One of our competitors recently took out a Water Wizard and lengthened his bay to put in a Coleman Hanna mini tunnel. Maybe it is not set up right but it is not very impressive.

 

[MEP001]

I replace the GC solenoids with a DEMA equivalent size diaphragm type which is cheaper and less prone to sticking. Either 473P for 3/8" or 474P for 1/2".