Mine is like in the first photo and that's how I like it. When it's too foamy, it's hard to see where you have already cleaned on the car and you end up missing too many areas.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Foam brush problems
- Thread starter Rtharlan
- Start date
I know this. But something is keeping it from doing that. Im not opposed to using the the foam generators. I just want to understsnd why.
The only thing I can think of as to why you’re getting almost instant foam when you put the foam generator on is aggressive mixing of the foam brush fluid with the air going through the foam generator. You got the foam generator chamber packed with S/S scrubby pads
Thats what i figured. All 4 are in now. I just need to install needle valves. Do some fine tuning. And slso see how far i can Lean out the mix.
It almost has to be a water issure to need such a rich mixture.!?
Last edited:
Hey, I don’t mean to Hijack the thread but there seams to be a lot of good knowledge here. Am I providing to much soap on my brushes? Do I need to slow it down a little? How does my foam look?
View attachment IMG_0889.MOV
View attachment IMG_0889.MOV
Last edited:
There's no video, just the sound of the soap plopping on the ground.
Earl Weiss
Well-known member
I saw video - try to dial it back a little - but it looks good.
MEP001
Well-known member
It's faster than I would like, but the consistency is good. You're probably putting out twice the foam that I would, and I'd bet I'm on the high end compared to most here.
