What's new

Fragramatics FV-3 air compressor question

kempape

Member
Joined
Jan 25, 2008
Messages
74
Reaction score
3
Points
8
i might need to replace air compressor that provides air that " propels/expels/atomizes " the fragrence . ( not the "bubble air "display).... --- im not sure of the voltage , brand , etc ) . i will probably order from fragramatiics but didnt see the air compressor part listed online there or at kleen rite... if knew a bit of the specs might direct order a generic -- especially since not 100 sure that pump is the problem -- all good guesses/ advice appreciated ..
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,371
Reaction score
941
Points
113
You don't need much air for fragrance machine and at 1 minute per vend with no back pressure the load is small. I have bought some Harbor freight replacements and they last a long time. You can buy several of those for the price of a Thomas.
 
Etowah

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Earl, have you used one like that in an actual Fragramatics unit? I would be surprised if it has enough volume to let the gun draw fragrance properly. If it does that would be great if the HF compressor holds up at all.
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,371
Reaction score
941
Points
113
I have used it in my JE Adams units with a Coleman Gun and Hose assembly.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Coleman uses a much smaller volume output compressor than Fragramatics. It ought to be worth a try, Harbor Freight has a good return policy.

I'll try to remember to look this evening to get the specs off the Fragramatics unit.
 

tdlconceptsllc

Well-known member
Joined
Jul 30, 2013
Messages
1,060
Reaction score
427
Points
83
Location
NC
Tdl, Thomas, is your man
I just seen this post today lol
I would double check to make sure you have a bad compressor, disconect the air line coming directly off the compressor and make sure it's pumping. I have seen the solinod for air clogg up with debris before. Those compressors in fragramatics last a very long time kinda rare they go bad.
 
Last edited:
Etowah

Galloping Grey

New member
Joined
Jan 18, 2014
Messages
1
Reaction score
0
Points
1
Location
Perth, Australia
i might need to replace air compressor that provides air that " propels/expels/atomizes " the fragrence . ( not the "bubble air "display).... --- im not sure of the voltage , brand , etc ) . i will probably order from fragramatiics but didnt see the air compressor part listed online there or at kleen rite... if knew a bit of the specs might direct order a generic -- especially since not 100 sure that pump is the problem -- all good guesses/ advice appreciated ..
Hi, I was wondering how your compressor replacement worked out. I've just had 3 of these units go under in a flood and need to replace. Are there any cheaper replacements that the factory unit ?
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Try eBay, I find them new occasionally for about half what Fragramatics ask for them, used about 10% of that. The original Thomas compressor they use is really good and worth the money for the reliability.
 
Top