What's new

Protectant build up

Etowah

washnshine

Well-known member
Joined
Feb 21, 2014
Messages
1,994
Reaction score
1,537
Points
113
Location
NY
I’m using Quest Total Shield Extreme and it is the best protectant I have ever used. I have heard it can build up if used too frequently/too concentrated. I noticed on my own car a grayish streaky haze that stands out on chrome and windows and a little bit on paint that comes off easily with a wipe of quick detailer or liquid wax. It does not leave any colored dirt or residue on the cloth I wipe it with , but it does come completely off the surface when you wipe it.

Could this be the build up from TSE? I wash my car several times per week in my friction tunnel with this package. It is not a dirt film - the cloth I wipe it with stays completely clean. I have not seen it on any other cars- I don’t have monthly plans.

I am just trying to get to the bottom of this before it becomes a problem with customers:if I go to monthly/unlimited plans and l know there are other Quest users on the forum.

FYI - I am applying it at the recommended 1:120 dilution to be used as 30 day protectant. My first tweek would be to cut that down.

Any ideas? I have not had this happen before.
 

carwashireland

Active member
Joined
Oct 25, 2013
Messages
271
Reaction score
40
Points
28
Location
Cork, Ireland
I also use Quest total shield Extreme and also use the wash several times a week but have not had any issues with build up.
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,050
Reaction score
1,695
Points
113
Location
Orange, MA
Cut the strength of the sealant back a bit and re-check. Keep a notebook and keep track of what you did.
 

Greg Pack

Wash Weenie
Joined
Sep 3, 2007
Messages
4,392
Reaction score
2,172
Points
113
Location
Hoover, Alabama
I'm not sure thats your issue but I would second waxman's suggestion of dialing it back a bit. That stuff still works great at half the strength you're using it. It's extremely durable.
 

washnshine

Well-known member
Joined
Feb 21, 2014
Messages
1,994
Reaction score
1,537
Points
113
Location
NY
Ok - I think I found the culprit. There was some sludge/gel backed up in one of the lines. It may have gradually been mixing in when delivered to the vehicle surface. Cleaned everything out and will see how it goes now.
 
Top