Used CAT 3535

[Flex- Wand]

What are they going for (worth) in good condition work when taken out never bin apart ? I have 3

 

[OurTown]

I have seen asking prices all over the place. Two that I almost bought was one went for $350 on ebay (no reserve auction) and an hour drive from me and the other was only $500 on Craigslist for an entire nice pump stand but was about a 6 hour drive. I have an eye on one that is $450 and about an hour and a half drive. Most ask $800-$1,500 but I have seen many way outside of those prices. If you don't want to sit on them ask $800 each. You might be able to get a good bit more if you can wait until someone needs one bad and does not want to pay $4K+ for a new one.

 

[Flex- Wand]

Ok thank you ! Ya I was thinking 750 there on nice stands with motors one stand is stainless :: there all Futura's in Ohio

 

[Kevin James]

I just bought a super nice Cat 3535 with a 10hp motor about a month ago for $275.

 

[OurTown]

I just bought a super nice Cat 3535 with a 10hp motor about a month ago for $275.

Dang. Where did you find that deal? 10 HP though?

 

[MEP001]

Yeah, 10 HP won't do much. It takes a 30 HP on 208V to achieve 1200 PSI.