What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Cryptopay Wiring

Twodose

Active member
Are the 2 grey wires from the cc scanner to the coin common and coin signal on the led7 just so you can get a coin count from mycryptopay.com coin count status?

Is that the only function?
 
You would use those swipers to send coin pulses to an existing timer. People usually have it set so each swipe is worth a certain amount, like two cash startup cycles, and they have to swipe again for more time. They are also used on single electronic vendors.
 
I don't have Cryptopay, but I've installed them in a half-dozen different washes for others, the last one over two years ago, and none of them have replaced a swiper in the last two to four years.
 
i have had cryptopay swipers for i am guessing 6-8 years (before they even came with the gray wires) and just had to replace one 2 weeks ago. i haven’t had any problems at all before that. the gray wires go to #1 & #2 on the led 7. you will only see coin count if you purchase site analytics
 
Back
Top