Cryptopay and Dixmor coin counting

[Eric H]

As always I can probably do my own research and find the information I want/need but it is easier to ask here.
I recently installed 7 new JE adams vacuums equipped with LED7 timer, coin acceptors, bill acceptors and CryptoPay. Am I correct that the CryptoPay does NOT add to the coin count shown on the LED7 timer? Is there a way to get the combined counts with out buying "site analytics" from CryptoPay?

 

[MEP001]

Am I correct that the CryptoPay does NOT add to the coin count shown on the LED7 timer?

If you run count-down it will because it will just send coin pulses.

Is there a way to get the combined counts with out buying "site analytics" from CryptoPay?

With count-down, you can use the timer's coin counts.

 

[OurTown]

We run Cryptopay count down on our vacs and it does not add to the coin count on our LED6 timers. I assume the LED7 would be the same.

 

[OurTown]

Maybe you can wire it so it sends pulses to the coin count. Call Dixmor.

 

[MEP001]

Maybe you can wire it so it sends pulses to the coin count. Call Dixmor.

That's how you would need to do it for the timer counter to read CC spent. Can you even run count-down without coin pulses to the timer? And yes, LED6 and LED7 would work the same.

 

[OurTown]

Can you even run count-down without coin pulses to the timer?

For whatever reason the timer must know that they are pulses coming from the swiper and not to add them to the coin count.

 

[MEP001]

It can't tell the difference if the swiper is just wired in together with the coin acceptor, but maybe yours is wired to the secondary credit input.

 

[OurTown]

maybe yours is wired to the secondary credit input.

Yes. It is wired to Cryptopay's instructions.

 

[MEP001]

There ya go then.