Cryptopay setup

[Joswhaha]

Howdy y’all,
I am trying to get my cryptopay all finalized and working how I want it in my SS. So I want it set at $3 minimum for 6 minutes and want my timer to reflect the same but I cannot figure out how to get the timer to count up and have the right amount and say your card will be charged $3. Can someone guide me a little, my head is already hurting from this part.

 

[MEP001]

If you connected the timer for count-up, it's ready to go. The CC charges are configured in the Cryptopay setup online, and it will display on the timer as configured. The only options in the LED6 is whether you want it to count up in time used or money spent (Dollars on count up or seconds on count up)

https://www.dixmor.com/TIMER%20PDF/LED6%20INSTR.pdf

 

[Toms PTcarwash]

First thing is do you have timers capable of count up for credit and count down for coin?
If so that part is set up in the dixmor timer. They need to be set for both. Then set your seconds per coin.
The $3.00 minimum and whatever maximum per swipe for credit is set inside your crypto pay.

 

[Joswhaha]

So it looks like some of my timers are dixmor Led6 and some are Led6s. I’m not sure if everything is working correctly right now or not but I will check it tomorrow. I know the cryptopay part is good because I tested it by swiping my card and it did charge $3, however I am not sure the timer is counting up correctly and the timer says your card will be charged $1.67 instead of $3.

 

[Toms PTcarwash]

Ok, if you want to charge $3 for 6 minutes you need to set the time per coin in your dixmor timer to 30 seconds. Not sure about your market, but that is really cheap!

 

[MEP001]

The LED6S programs and functions the same as the LED6 as long as it's set for bay use.

https://dixmor.com/TIMER%20PDF/LED%206S%20INSTRUCTIONS.pdf

Have you confirmed that it's set for count-up in the Cryptopay setup?

 

[Joswhaha]

The LED6S programs and functions the same as the LED6 as long as it's set for bay use.

https://dixmor.com/TIMER%20PDF/LED%206S%20INSTRUCTIONS.pdf

Have you confirmed that it's set for count-up in the Cryptopay setup?

Yes, they all work but I haven’t made sure that the amount the timer says is charged is actually what it charges. My price is different for card than for quarters and I can’t figure out if I have it set just right. It functions and counts up but I don’t know if it counts up at the credit card rate or coin rate?

 

[Toms PTcarwash]

My dixmors are a few years old, but I can't have a different charge per coin on mine for cash vs/credit. Maybe the S models can? I can however set a different minimum charge for a card swipe though the cyrptopay set up. If you look at the display on the dixmor timer, just a second or two after you press the stop button it will display the amount charged to card.

 

[Joswhaha]

I see, I didn’t set out to have a different amount charged but that is how I set up the cryptopay and I decided to just go with it. I’m going to try to mess with it again tomorrow. I got busy today with other things.

 

[MEP001]

My dixmors are a few years old, but I can't have a different charge per coin on mine for cash vs/credit.

You don't set that in the Dixmor.

Maybe the S models can?

I explained above what the S model is for.

I can however set a different minimum charge for a card swipe though the cyrptopay set up.

Of course, because that's where you set it.

 

[Toms PTcarwash]

Set your dixmor # of coins to start, I think it was 12 for what you were looking for, and seconds per coin. i think 30 for what you were looking for. If you what to have a minimum credit card charge set that up per swiper in your crypto pay.
Just an example, if you have 30 seconds per coin and 12 coins to start, that's 4 minutes for $3. If you want to have a $3.50 minimum credit charge, the customer will get a minimum of 5 minutes for that $3.50 when using a card.

 

[Toms PTcarwash]

If you didn't already do so, get some attendant cards from crypto pay. You don't want to be paying processing fees for your own credit card!!!

 

[MEP001]

If you didn't already do so, get some attendant cards from crypto pay. You don't want to be paying processing fees for your own credit card!!!

You have to use a credit card to test credit card function. The attendant card doesn't work the same way.

 

[Toms PTcarwash]

Does for me.

 

[Toms PTcarwash]

You just need to look at the attendant card purchases on the control panel.