Nayax configuration

[SprayDC1]

Installing Nayax VPOS touch in car wash bays and looking for device price configuration and pulse directions. Anyone have directions?

 

[James.Ireland]

I've found Nayax support to be good. My agreement with them includes unlimited tech support in the base price. They have sent me wiring diagrams for the config I wanted same day.

 

[cantbreak80]

Nayax value should be factory pre-set to Quarters. [$.25] and Minimum charge amount.
Contact Nayax to confirm



With Dixmor LED6 timers:

Program “Coin Valu” [$.25]

Program “C” Time per coin/pulse to desired seconds per coin

Program “S” Number of coins/pulses to start to desired value

Program CC Pulse Value to [$.25]

Program “Dollars on Count Up” to display dollar amount charged as it accumulates



Connect Nayax Pulse 1 wire to Dixmor LED6 White/Black wire (Pin #8)



So…

If your start up price is $3.00 (12 quarters)

For 3 minutes (180 seconds)

180 seconds / 12 quarters =15

Dixmor “C” menu setting will be [15]

Dixmor “S” menu setting will be [12]

A credit card customer will see the timer scroll money spent as it accumulates…just like a gasoline dispenser.

 

[H-town]

Nayax value should be factory pre-set to Quarters. [$.25] and Minimum charge amount.
Contact Nayax to confirm



With Dixmor LED6 timers:

Program “Coin Valu” [$.25]

Program “C” Time per coin/pulse to desired seconds per coin

Program “S” Number of coins/pulses to start to desired value

Program CC Pulse Value to [$.25]

Program “Dollars on Count Up” to display dollar amount charged as it accumulates



Connect Nayax Pulse 1 wire to Dixmor LED6 White/Black wire (Pin #8)



So…

If your start up price is $3.00 (12 quarters)

For 3 minutes (180 seconds)

180 seconds / 12 quarters =15

Dixmor “C” menu setting will be [15]

Dixmor “S” menu setting will be [12]

A credit card customer will see the timer scroll money spent as it accumulates…just like a gasoline dispenser.
Does the #8 pin wire needs to be connected to any other wire other than the pulse 1 wire?Having a hard time with this! Thank you !

 

[H-town]

Hello!

 

[H-town]

Does the #8pin wire needs to be connected to a different wire other than the pulse 1wire? I am having a hard time with this. Thank you in advance.

 

[cantbreak80]

Pulse 1 wire must be connected to Dixmor LED6 Pin 8 (White/Black wire)

You're welcome (in advance).