How often do you guys backwash your charcoal-chlorine filter bottle? I just replaced mine after 20 years. It was leaking. I can’t remember how often I had it set for. The new one recommended every seven days, but I thought I did mine more often than that. I’ve already disposed of the old one so I can’t check the settings on it!
Chlorine filter regeneration
- Thread starter Don B.
- Start date
cbchevy4x4
Active member
- Joined
- Jun 6, 2020
- Messages
- 177
- Reaction score
- 167
- Points
- 43
10 days is what mine is set at
Well , mine should be fine at seven days then. I just couldn’t remember. Thanks!
MEP001
Well-known member
RO systems don't backflush. You can't backflush a membrane without destroying it.
Carbon filters don't regenerate, they backflush and settle-rinse to repack the media bed to avoid channeling.
Carbon filters don't regenerate, they backflush and settle-rinse to repack the media bed to avoid channeling.
Do you own a purclean ro?
Yes , I shouldn’t have said regenerate. Water softeners regenerate.
I meant flush the charcoal filter.I think the RO just flushes-washes the minerals off the membrane filter.
MEP001
Well-known member
It's probably the closest applicable term. A charcoal prefilter is just a water softener with the brining ports plugged. I wasn't meaning to correct you. You're correct about the RO, it just runs full water flow at low or no pressure.
MEP001
Well-known member
No, but I've worked on a lot of RO systems. Why?
Oh no, thats fine. I didn’t take it that way. That’s how we learn. It’s good to know exactly how all the equipment works.
Buckeye Hydro
Active member
- Joined
- Jun 18, 2022
- Messages
- 198
- Reaction score
- 128
- Points
- 43
Typical life span on the GAC in a backwashing carbon tank is 5 years. After that you'll want to re-bed it (put new carbon in it).
Russ
Russ
