What's new

Best way to cover hoses on roof?

Mchas

Active member
Joined
Jun 15, 2019
Messages
169
Reaction score
47
Points
28
Just redid all of the high and low pressure hoses on our roof and would like to protect them from the sun to get as many years as possible out of them.

Any suggestions for something to cover them with? I was thinking of something like split wire loom but since the hoses start in a large bundle and then slowly get narrower as each bay splits off it’s hard to figure out a good solution.

Curious what others do with their hoses on the roof to help protect them?
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
I've seen tile drain used for short runs from a trough to where they come up from underground in PVC. You'll probably want some that's not perforated.
 

Dirt

Laser Blade
Joined
Jan 13, 2009
Messages
130
Reaction score
39
Points
28
Location
monessen,pa
a 1 foot x 1 foot, three sided trough made from treated lumber ?
 

DAWGWASH

Member
Joined
Mar 14, 2021
Messages
94
Reaction score
68
Points
18
Just redid all of the high and low pressure hoses on our roof and would like to protect them from the sun to get as many years as possible out of them.

Any suggestions for something to cover them with? I was thinking of something like split wire loom but since the hoses start in a large bundle and then slowly get narrower as each bay splits off it’s hard to figure out a good solution.

Curious what others do with their hoses on the roof to help protect them?
Had a heat pump guy make a trough and put 2 inch styrofoam on all4 sides and made it where the lid would come off. Has lasted over 25 years and still in good shape. Make it big enough so you can work on the fittings
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
Just spray paint the lines all white. You'd be surprised how effective & cheap a solution that is.
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,363
Reaction score
940
Points
113
Just redid all of the high and low pressure hoses on our roof and would like to protect them from the sun to get as many years as possible out of them.

Any suggestions for something to cover them with? I was thinking of something like split wire loom but since the hoses start in a large bundle and then slowly get narrower as each bay splits off it’s hard to figure out a good solution.

Curious what others do with their hoses on the roof to help protect them?
Do you need to heat the trough or are you in a non freezing climate?
 

soapy

Senior Member
Joined
Sep 1, 2007
Messages
2,894
Reaction score
855
Points
113
Location
Rocky Mountains
I run all my lines in 6 PVC pipe just under the roof attached to the ceiling joists. I do not see why you could not run them on top of the roof.
 
Top