Waxman
Super Moderator
Replaced battery but......
My goldline still loses wash names/prices when I lose power.
Any ideas?
My goldline still loses wash names/prices when I lose power.
Any ideas?
Goldline loses memory
- Thread starter Waxman
- Start date
DiamondWash
Well-known member
It's probably just low on Vitamin B12 and Vitamin D 
It needs to go in for service. I'll send you my loaner controller.
washnvac
Well-known member
I put an uninteruptable power supply in mine when I was having the same issue. That solved it.
Kevin James
Active member
- Joined
- Nov 15, 2007
- Messages
- 562
- Reaction score
- 32
- Points
- 28
Do you have a link to which pure sine wave uninterrupted power supply you installed?
MEP001
Well-known member
APC BR1000MS 1000 VA Pure SineWave Back-UPS Pro Battery - Newegg.com
Buy APC BR1000MS 1000 VA Pure SineWave 10 Outlets 2 USB Charging Ports Back-UPS Pro Battery Backup with fast shipping and top-rated customer service. Once you know, you Newegg!
It won't run it very long, but my problem was different. The power would blink out for half a second, the bill acceptors would remain active but the controllers would not, so everyone after the power blink would lose their money.
Greg Pack
Wash Weenie
Been thinking about buying one of these for camera system and router, or a comparable ecoflow. brand. This one has 600w continuous. Not sure what wattage the goldline uses with the heater though:
www.bluettipower.com
BLUETTI EB3A Portable Power Station | 600W 268Wh
BLUETTI EB3A, 40 minutes to reach 80% charged! Just a ultra-portable power station that crazy campers will love.
www.bluettipower.com
OurTown
Well-known member
Been thinking about buying one of these for camera system and router, or a comparable ecoflow. brand. This one has 600w continuous. Not sure what wattage the goldline uses with the heater though:
BLUETTI EB3A Portable Power Station | 600W 268Wh
BLUETTI EB3A, 40 minutes to reach 80% charged! Just a ultra-portable power station that crazy campers will love.
You can check it with your clamp on multimeter the next time it is cold enough out for the heater to kick on. Also check it while it is returning coins to get an idea of the full amperage draw.
Roz
Well-known member
- Joined
- Oct 29, 2017
- Messages
- 1,335
- Reaction score
- 766
- Points
- 113
Check your GL firmware version. We are experiencing some gremlins in our GL out of the blue. While we trouble shoot he issue we learned that our firmware is old by several big updates. Hoping the new firmware exorcises the gremlins.