Seeking Aggressive Vertical Nozzle Stands Assemblies for entry of Automatic Wash Bay

[Good Moody]

By chance do any of you have any in very good condition you want to sell? Thanks!

 

[Blanco]

I have a few different sets. 2 sets are brand new (peco and macneil) and 1 set is used (mosmatic). I can upload pics tomorrow.

 

[Good Moody]

I have a few different sets. 2 sets are brand new (peco and macneil) and 1 set is used (mosmatic). I can upload pics tomorrow.

Sounds good, Look forward to seeing them.

 

[Good Moody]

I have a few different sets. 2 sets are brand new (peco and macneil) and 1 set is used (mosmatic). I can upload pics tomorrow.

Are they actual vertical Side Blaster Manifolds?

 

[Blanco]

Sorry I looked over the vertical part. The macneils are vertical. The peco and mosmatic are not. I’ll attach pics anyway.

 

[Good Moody]

Sorry I looked over the vertical part. The macneils are vertical. The peco and mosmatic are not. I’ll attach pics anyway.

Whats your email address?

 

[Sparkleclean]

We are removing 3 pdq g-5 machines and all 3 bays have their “power towers” that will be available soon. I can send you pics if you want them?

 

[Good Moody]

Sure, how old are they and approx count per machine.
Thanks

 

[Sparkleclean]

There’s no count on the towers. They are just square stainless tubes carrying stainless pipe with rotating nozzles on it. They stand about 4/5’ tall. They tie in to the stainless underbody pipe and all run together. I’ll post pics later.

if you were asking about the G5 machines I do not know the car counts on those currently. Those are approximately 17/18 years old I think.

 

[Good Moody]

I was just curious of the wear on the towers.

Also, what are your asking for towers

 

[Sparkleclean]

The towers are not as old as the wash equipment is, this site used to have Gatling guns from PDQ when it was originally built.

 

[Good Moody]

The towers are not as old as the wash equipment is, this site used to have Gatling guns from PDQ when it was originally built.

When are you going to display the photos etc?

 

[Sparkleclean]

Sorry I will post them in the morning. I have Been busy getting ready for the renovations and forgot to take the pics today. I apologize!

 

[Sparkleclean]

I have three sets of these. Each consists of two towers with 4 rotating nozzles on each, and the underbody pipe. I also have a handful of new rotating nozzles as well that are not installed yet.

I will also have quite a bit of PDQ equipment , both new and used, for both access machines and G5 units if anyone needs it.

 

[Good Moody]

I have three sets of these. Each consists of two towers with 4 rotating nozzles on each, and the underbody pipe. I also have a handful of new rotating nozzles as well that are not installed yet.

I will also have quite a bit of PDQ equipment , both new and used, for both access machines and G5 units if anyone needs it.

 

[Good Moody]

What are you asking for the two vertical units?