Laser wash 360

[Danchez]

Hi all, my
Name is Dan and I’m new to the forum.
I maintain 5 car wash locations in Eastern Canada.
We have Lazer wash 360 and M5 touchless automatics.

Are there any other 360 or M5 guys on here?

 

[soonermajic]

Just pulled out a 360 & teplaced w/ a Razor Edge...

 

[Mick]

Hi all, my
Name is Dan and I’m new to the forum.
I maintain 5 car wash locations in Eastern Canada.
We have Lazer wash 360 and M5 touchless automatics.

Are there any other 360 or M5 guys on here?

we have 2 M5s we had the car wash for about 6 months replaced both high pressure pumps and many sensors. Still learning as we go

 

[GoBuckeyes]

We had two M5's and just replaced them with two Petits. We'll be re-installing the M5's at another location this summer if all goes as planned.

 

[SplashDash]

Just pulled out a 360 & teplaced w/ a Razor Edge...

Do you like the razor edge better is it less maintenance? we have M5 and wish we would have stayed with the laser 4000. Sold us on the M5 it’s costly if the computerized parts go out & not everyone can work on them.

 

[SplashDash]

we have 2 M5s we had the car wash for about 6 months replaced both high pressure pumps and many sensors. Still learning as we go

6 months they should have been warranty . We have a lot of repairs it seems always something.

 

[soonermajic]

Do you like the razor edge better is it less maintenance? we have M5 and wish we would have stayed with the laser 4000. Sold us on the M5 it’s costly if the computerized parts go out & not everyone can work on them.

Yes, like the look & ability to do multiple things. However, its brand new & 360 was 9 yrs old.

 

[BubblesIllinois]

Hi all, my
Name is Dan and I’m new to the forum.
I maintain 5 car wash locations in Eastern Canada.
We have Lazer wash 360 and M5 touchless automatics.

Are there any other 360 or M5 guys on here?

I have a Laserwash 360plus.

 

[Jsobi]

We have 4 M5 and we are adding 3 more. Replaced steel 4000. We are keeping 7 stainless 4000 running tho. All good machines

 

[peter0021]

Im looking at purchusing a 360 plus would like to know what issues they have ?

 

[Bud's]

We have 4 M5 and we are adding 3 more. Replaced steel 4000. We are keeping 7 stainless 4000 running tho. All good machines

How are you keeping the equipment in the JO cabinet working on the 4000 machines? Specific parts like input cards, output cards and the mini relays on the output cards

 

[Jsobi]

We save all the old electronic stuff when we strip them down.

 

[soonermajic]

We save all the old electronic stuff when we strip them down.

So you're running FOURTEEN LW4000 & M5s? That's crazy!!