What's new

Floor heat issues/ Solutions

East side J

New member
Joined
Apr 15, 2019
Messages
6
Reaction score
0
Points
1
Ive been pressure testing lines in my floor heat system and it appears that the whole thing is compromised. Im curious if anyone out there has ran into this issue and what a potential solution could be. Ive considered doing an overlay. Basically running new heat lines on the existing concrete and, and pour over that?
Have also considered installing doors and using radiant heat??? I have a solid 3-4 months of below freezing conditions. Creative ideas welcome! thanks all!!!
 

Buckeye Hydro

Active member
Joined
Jun 18, 2022
Messages
198
Reaction score
128
Points
43
I guess it depends upon what you mean by "appears the whole thing is compromised." What, specifically, is the problem?
 

Skyler

New member
Joined
Oct 16, 2022
Messages
11
Reaction score
7
Points
3
we Have used a product called hercules boiler sealer which stop the leak in our floor heat system . it was $9 a quart
which we used 3 quarts and ran the system normal and we stopped losing fluid.. The leak we were having was around 2 gallons a week.
 

lighthousecarwash

Active member
Joined
Sep 29, 2009
Messages
328
Reaction score
56
Points
28
Location
Missouri
we Have used a product called hercules boiler sealer which stop the leak in our floor heat system . it was $9 a quart
which we used 3 quarts and ran the system normal and we stopped losing fluid.. The leak we were having was around 2 gallons a week.
Was this added to an all water system or is it compatible with antifreeze/gylcol?

Thanks,
Lighthouse
 

cantbreak80

Maybe I need new clubs
Joined
Feb 10, 2008
Messages
1,131
Reaction score
582
Points
113
Location
CO
Was this added to an all water system or is it compatible with antifreeze/gylcol?
lighthouse,
I've used Fix-A-Leak on glycol systems with good results...albeit temporary...as in one or two heating seasons.
One location required a dose every year. They got 6 more years of reliable operation.

When it finally doesn't fix the leak it's time for tearout or overpour, imho.

BTW, an all-water floor heat system is a recipe for disaster. Power failures don't seem to occur in warm weather, donchaknow?
 

2Biz

Thread Killer!
Joined
Nov 22, 2010
Messages
2,834
Reaction score
439
Points
83
Location
Ohio
Also going to add to the conversation...With the newer wall mount demand heaters, the heat exchanger has "Very Tiny" passage ways to get the efficiency. I wonder if "Fix-A-Leak" will block off or damage the heat exchanger in these heaters?
 
Top