about 4+ years ago i finally started despencing
tokens and quarters in my bill
changer. after alot of research i found that only the ctx220
tokens from vanbrook would work. 2 washes with a total of 25 laurel mechanical venders. this
coin will drop thru the venders with out clogging them. this method allows you not to have to change any thing in the vendors. posted on all venders will not take
tokens and only quarters. my bollar bill machine spits out a mix of
tokens and quarters, only need to adjust
coin switch. i started out at 200
tokens to 2000 quarters. this will give out just enough
tokens so the customers dont have to take away extra
tokens.
this stopped most people from taking away my quarters but some still leave and never return. raised to 250
tokens and have stopped any quarters from going away at all. have gone thru about 10,000
token so far. if you go to the larger
tokens they will stop up your despencers and you also can not mix the
coins to despence from a single hopper. if you have 2 machines and 1 is
tokens and 1 is quarters, they will use only the quarter machine. you can add or remove the amount of
tokens to fit your needs. my major problem was going thru 1000.00 in quarters each month. this will **** off any wash near you that also puts out only quarters. they will lose more quarters once you do this. i heard about it when i did it from other washes. oh well i still smile about not losing quarters. now when someone drives up in front of the dollar machine and jumps out, i no longer care that they are taking my quarters. the only draw back with these
tokens, is that you do not make a killing if the
tokens never come back because of the cost. they run 20 cents + each.