Graffiti Removal Suggestions for FRP Boards
- Thread starter ALMO
- Start date
mjwalsh
6 bay SS w/laundromat
Almo,
Krud Kutter for a starting point --- might work --- depending on the ink or type of paint etc. You can get it by the gallon. Let us know how you come out. We also got some citrus stuff that they use at the oil fields from an oil field supplier in Williston, ND that really worked for some horrific oil stains recently. I just looked & it says "PC- Citra Solv" on the 5 gallon container we have.
MJ
Last edited:
Cool, thanks. Just called the Krud Kutter people. I guess this product is sold at Walmart. I will check that out this week and let everyone know how it goes.
soapy
Senior Member
Goo off is another product designed for this.
Last edited by a moderator:
MEP001
Well-known member
I assume you meant Goof Off: http://www.homedepot.com/webapp/wcs...H+ALL&langId=-1&storeId=10051&catalogId=10053
Some of their products are basically paint stripper. There are grades of FRP, some that can withstand the chemicals and some that will be ruined by it. If the graffiti is fresh, try paint/lacquer thinner or adhesive remover first. The low-end FRP absorbs the solvents in spray paint and anything strong enough to remove it will eat the FRP as well.
Some of their products are basically paint stripper. There are grades of FRP, some that can withstand the chemicals and some that will be ruined by it. If the graffiti is fresh, try paint/lacquer thinner or adhesive remover first. The low-end FRP absorbs the solvents in spray paint and anything strong enough to remove it will eat the FRP as well.
pgrzes
Active member
Believe it or not, OVEN CLEANER!!! If its enamel spray paint oven cleaner works great. Spray it on it stays where you spray it cause it foams up. Leave sit for a few minutes and pressure wash it off. If that doesnt work, we call our township, they have a group called TAG(townships against graffiti). They come out with a box truck, spray there miracle cleaner and its gone.
soapy
Senior Member
Goof off. Guess the F got misplaced, but not to worry MEP is on patrol pointing out the obvious.
pitzerwm
Active member
If you notice in the small print, I dropped the "F", my bottle is called Goo Off.
I tried the Krud Kutter product. It worked good on Silver spray paint. It was very difficult on the darker colors. I think I am just going to paint the boards and see how that looks. They are too expensive to replace. Lowes charges $25 per board. I have 12 boards per bay!!