cleaning up mud
Member
Anyone ever have this happen on their 1.0 or 2.0? This van used our cw all the time and just yesterday the boom came down in the middle of two different passes and hit the top of the van in the same place.
Boom came down in middle of pass and hit top of van
- Thread starter cleaning up mud
- Start date
Reds
Member
I have 2 WW2.0's with 100k washes on each one. Never had anything like that happen. I wish there was a way to rig a safety eye on the underside of the boom. My concern is with people going thru with wheelchairs, etc. attached to their trailer hitch.
cleaning up mud
Member
https://www.youtube.com/watch?v=_mgLsw83Zb4&feature=youtu.be
Reds, here is a video, its kindof long, the first front to rear pass after the wheel brushes and then the next front to rear pass, the boom came down in the exact same spot and hit the top of the van.
Reds, here is a video, its kindof long, the first front to rear pass after the wheel brushes and then the next front to rear pass, the boom came down in the exact same spot and hit the top of the van.
Waxman
Super Moderator
the boom also came down at the correct spot (rear of van) after it came down early.
so a sensor is sending a false input to the boom down control.
so a sensor is sending a false input to the boom down control.
Greg Pack
Wash Weenie
I noticed the machine acts strange on the first pass.- doesn't it pause for a couple of seconds?
I wonder if the profiling eyes made contact through the van windows and somehow confused the machine.
I wonder if the profiling eyes made contact through the van windows and somehow confused the machine.
Greg Pack
Wash Weenie
IIRC Coleman has a contact switch kit you can install.
Waxman
Super Moderator
that does make sense but wouldnt it do that on every pass?
Greg Pack
Wash Weenie
The car is being profiled/measured on the first two passes. Those values are stored and used for the remainder of the wash.
cleaning up mud
Member
I wondered the same thing about the window in the van, it been through this wash many times, if that happened it is a fluke.
cleaning up mud
Member
First estimate of damage is $4500.00. wow!!!! After that here comes the adjuster.
Greg Pack
Wash Weenie
Due to the fact that it appears boom went down in the same place on the car AND it is approximately the same spot that the machine pauses when profiling I bet it is software-related.
You can send that video to Coleman. They may have some answers. They have made some software changes in the recent past to address some safety oversights in earlier versions. The current version is 2.54
You can send that video to Coleman. They may have some answers. They have made some software changes in the recent past to address some safety oversights in earlier versions. The current version is 2.54
Reds
Member
Is it possible that you have a counting wheel issue and the WW is confused as to where it is?
cleaning up mud
Member
First thing I did was send JC the video. Looks like if this happened on this van through the windows it would do it on all the pickups we wash.
i have fusionx within the 1st year of operation the boom swipe the back side of minivan. Your redlion software should be updated to where if the sensors (eyes) are not working the boom should not come down. safety update not a fix on the issue. i think your eyes are going out.