What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Best Heat tape for trough!!!

Thanks for the link and the snapshot.
I assume you've "extended" the sensor wires to achieve the 20' spacing?
And, yes...your KISS approach is great way to go, and MUCH cheaper than mine. But what fun is having a computer in the engine room without having it "All Dolled Up"? ;)
 
The sensor wires on my displays are 3 meters long and my ER is about 12' wide. The displays are about 3' from the ceiling....So the sensor probes can be 20' apart....Well maybe 18'.... :rolleyes:

You really only need one sensor and display. My floor heat loop is such that it is off centered of the ER, one bay to the right, 3 bays left. SO I wanted to see how much the loop cooled down on its way back to the ER without the heat tape on. There was no notable difference. Plus the batteries do go bad after being on 24/7/365....But never at the same time! So when one does crap out....It gives me time to replace the batteries! I never OVER-ENGINEER ANYTHING! :rolleyes: :rolleyes:
 
If I lived further from the wash like you, it would be a no brainer! But I live 2 blocks away and my wife works 4 blocks away on the same power service. If the electric goes off, we know it right away. The KISS method works perfectly for me. I'm there at least 3 times a day, maybe more when it gets real cold....

The only issue I see with a system like that is how long can you get a usb extension cord for it to still work? Is there a limit? I've never ran into that issue. It would be nice if the sensors were wireless! If you're going to dream, Dream Big!
 
Back
Top