Recent content by cbchevy4x4

I haven't had that problem, though i have heard of it. The biggest issue ive seen with cash app is their policy on the preauthorization, they may hold the preauthorization up to 30 days, thats actually in their customer agreements when you sign up, ill never use cash app for that reason alone...

I had this happen last summer. I threw new solenoids at it 1st, problem stayed, new flowjet, problem stayed. Replaced every high pressure check valve on the roof in the trough and problem went away. The pressure was backfeeding to the solenoid causing it to jam the plungers in. Id probably...

I dont have nayax, so cant speak on that. I do have a token changer at 1 location that has 4 options. The top package will dispense bonus tokens. The most purchased package is the lowest, i have gradually crept the pricing up on that and intend to go up again at year end. If i were doing...

Instead of up charging on the time per quarter simply raise your minimum credit card purchase but keep the rate the same. Im $3 to start but have a $6 card minimum. If you play the numbers right and how long the average person takes to just hose off and give them a couple extra minutes they...

Keep your rate the same, you WILL make more money with credit cards already. I called cryptopay about this years ago as i felt that i should be recouping the CC processing fees by charging more per the same amount of time. After discussion with them and other operators i elected to keep the...

Would i try to get the pressure up yes. I run around 1050 to 1100 psi with trigger pulled on 2506 or 2507 tips. But the first thing i think of is when i have people complain about low pressure is, were they pulling the trigger? 9/10 times its no they were not. Thats why when im on site and...

The carwash business is hugely dependent on weather. Rainy they dont wash, calling for rain they may wash, too cold they dont wash, too hot they dont wash. Its a heat wave going on right now in my area and things are pretty slow. Use the time when your slow to clean and upgrade/update, or do...

Thats everything ive done in 6.5 years. Pretty small list considering alot has been preventative in my mind. Im ocd and dont like being down, i will replace suspect parts on a rainy day so i know im good on the sunny days. I have a vector that im replacing in september. ive put 3x the price...

I have had to replace a trolly gear box, rebuild a changeover valve, replace various hp hoses, replaced a couple fittings, replaced nozzles, one prox sensor, one set of photo eyes, replaced a couple relays that hang occasionally, monthly greasing, just replaced the belts on the rails a month or...

Not a lot you can do I dont get bent over it any more. I do the following. 1. Make sure you have signage for what ever you want to deter so you can reference it...no paint, muddy messes, leave it cleaner for the next customer, etc. etc etc. 2. Anytime i have activity that im not fond of i...

not sure where your off sets are set but maybe begin by increasing the rear sonar by 1 and evaluate from there.

I have ball valves before every solenoid to every function. If i have a flow jet cycling when the function is not active, I close the ball vavles 1st and see if the problem goes away. If it does, i will then open the ball valves back up one at a time until i can locate the bay the gremlin is...

I dont respond to the BBB, never have in any business ive been a part of in 25 years. I despise the BBB as they have built the reputation to people that are reviewing your business as "turning you in". I refuse to feed their ego. I namely dont have the time to respond to every review...

Ill second this!!! Im in business to make money, and ill take it however i can get it!!!

If ordering 1 pail at a time youll go broke...FAST. I Order in bulk from kleenrite. Right now most of the soaps i use are buy 3 get 1 free. I order 1 pallet mix and match what you need and get free shipping with 36 pails. If you need/want to order 1 5 gallon pail at a time i would pay for...