This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Have you considered a CONFORM building? Basically, it is a concrete building poured into forms that become the walls. Cost effective and quick to put up. We used on the last wash I was involved with building.
Full disclosure… I recently took a job with another wash supplier, and we represent...
Sorry missed your post.. back up ring(white) goes away from the pressure. Black oring towards pressure. The puck has a small hole in it, the hole towards the air. I like to see the air pressure for the valves at 10 psi per 100 psi of pump pressure. so 1000 psi pump equals 90-100 psi of air ball...
I timed the HV against the Razor. The same exact vehicle, both programmed identically. The Razor washed 16% faster.
You should be able to wash even faster with the Razors by utilizing some of the flex features etc. I did a small sample however..4 washes only
I was wondering about middle one myself.
Yes PSI will need to get corrected, even so id expect your TDS to be lower. may need regulator or rebuild??
is it a 3 phase pump? may need to just switch a couple legs around to get the pump to turn in right direction,
Yes same here always when high dew points dryers just couldn't dry out. just get high pressure washer out and clean from time to time.one more job to add to never ending to do lists.