Recent content by Thunder sudz

I had a similar issue and the prox eye was covered in muck. Clean them off with alchohol haven't had that issue in months,and before it was a daily occurrence

I have a futura revolution and today the wobblers stopped. Checked the basic things,leaks,pressure, fluid etc. Cant figure it out. The side wobblers move very slow during the phantom wash. I'm needing any help

Glad you're up to date on things. I changed my tips to green and have great foam flow form the triple foam

That's what I get paid to do. Not to mention they are bot very familiar with the Futrua Revolution.they deal more with the Razors at my other locations. I'm trying to figure this out on my own and reaching out here for some helpful advice

And again this is an old Futura Revolution #2

I agree. Red is massive. I'll have to get some tips ordered he gave me 6 purple to replace the red

We use salt mix and water softener addictive. And he does check things hints why he told me to change the tips on the hydrominder from red to purple

I don't believe it is a hard water issue. I feel my dilution is off

Thanks for the advice. And actually I have new flojets and rebuilt the hydrominders. Cleaned all the tanks and hoses 3 months ago. No air leaks all my check valves are functioning. Only thing different is a Trivalley rep came out and told me I need to switch out the tips from red to purple. Now...

Could you give any insight on that? I'm fairly new to this.

40 psi on chemical and 30 psi on air. Only reason I changed the tips is a rep came out to the location and told me. Should I go back to red?

I'm running tri valley Brilliance tri foam. On the jug it reads to dilute 120:1 to 240:1 depending on equipment. My psi is 40 for the chemical and 30 psi for air flow. The rep told me to switch them from red to purple and that's when I noticed the lack of color foam. I'm just having a hard time...

I'm not totally sure. We use softener and salt to the brine tank

I thought air was an issue also.