Search results

On a similar note, any idea what size crush guard I should use for 1/4" poly tube? I have been wanting to add some to my tire shine tubing for years, and now I can just order multiple sizes while it's on my mind. Thanks.

Thanks. No issues with it scratching cars or being an issue in any way?

Earl, could you provide a link to the coil wrap on KR? I have that same issue and would go ahead and add it to all 12 of my Coleman combos asap. Thanks.

those functions get water from the tank. Check your check valve for that bay going to the holding tank.

I put TSS light bars on either side of my Razor and they work great. I have them rotating 3 colors. Car is covered in different lights the whole time. I drove through a Razor with Spectra Ray once and you only see the lights when the machine is passing over the windshield, so not as much as...

How do you guys like your spectra ray? Would you buy it again? Anyone have the enhance version that adds lights on the walls?

I just bought an air dryer and need to install it. I see that all of the main lines in/out of the compressor are connected using black pipe. To put this inline, should I use hard piping as well, or just using fittings and polytube? If not, what would be the best thing to use? Thanks.

Thanks for the photo. Very packed! I think that's as good as it gets, would just need to play around with what instructions are provided and where.

Very crowded, but looks great and is functional. Would you be able to still do it with 11 push buttons?

I had rotary for years. Worked fine, but I would have to constantly check them to make sure they were still smooth and easy to turn. Once they got hard to turn, I would spray them with something to loosen them up and that bought me some time before replacement. They were right in the middle...

Do you have any photos of a finished product with the tap installed? What you guys did seems like the only option, but you lose the space for instructions. I also worry that they wouldn't figure out that they can tap.

Not totally true. Many locations make decent $ on vending. All depends on your area and how busy the wash is.

Hey, at least no chargebacks with cash. I've been lucky, but had 5 last week. 4 were the same person. I found video of him using and swiping his card for 3 of them, the 4th was too far back in date for my cameras (claimed counterfeit card and he didn't participate in transaction). I submitted...

I had planned on sending it in over the summer, but every time I called them, they insisted it was fine and that the issue had to be something else. I was never sure, so I just waited. If a 2nd thermostat doesn't fix it, I'll have to send it in.

But you have a sign that says cameras!

Everything optional, you get what you need. I've bought full sets and also just the door, then wired in my old components.

I replaced those exact doors with Ginsan push button doors. Love them. Doug Empie <dempie@ginsan.com> can help.

I plan on trying that out this week. Have plenty of old signage that I can cut up and bend. Thanks.

Hmm. Never thought about floor heat having and effect. That could be it, but floor heat has always been there as well, so still curious as to why it started now. Any chance you have a photo of how yours is mounted?

This is now my 3rd year with this issue after not having any issues the 1st 7 years. For some reason many nights when it's cold, my weep miser shows a temp of about 6-8 degrees higher than it really is. Of course this leads to frozen bays most mornings. My temp sensor is in the bay right next...