Search results

Not sure if this helps. You shouldn't have to hook up the gray wires. I believe they are only counting coins or pulses.

Are you still happy with this sorter?

Don't waste your money on Bourbon. Can't give them away!

I mounted them on my ceiling right above the windshield and wired them to come on with my soap passes. Customers seem to like it. I use blue and the whole inside of the car lights up really good. I also have them come on with the "Carnauba Wax" on my top wash...

I have a stand alone IBA (Razor) that does well and I am thinking about adding onto my building and putting in a WW Profile. I have a few questions maybe some of you can help me with. Are your friction machines attended? What if a muddy vehicle goes in, will it scratch the sides of the car...

I have a dual tank softener and the water is at 2 grains. I pulled the membranes up an down and twisted them to make sure they were sealing good and I was able to get it down to 4 grains. I changed them because the TDS started creeping up (it was at 2 when I started the RO unit up a 1.5 years...

I change both membranes on my RO system. Also changed the pre filters. My product is 2 and 1/4 gallons and the reject is 3 and 1/4 gallons. The pressure is at 200 PSI. The product water is 7ppm. This Product water used to be down to 2ppm. Any suggestions?

I installed the same lights you recommend and wow. They are so bright they hurt your eyes. Have you had any customers complain about them being too bright?

A young girl ran over my 2" Zurn 975XL. I reinstalled it but it now has a slight leak out of the vent on the bottom. The backflow is at least ten years old. I am wondering if I should try a rebuild kit or replace the entire BFP? Thoughts?

I have two guys that are custodians that help me when they get off from their regular job. They do a great job. I would check with your local school system.

Congrats! Will miss you at the show this year!

I had a lady leave a 2 star review this week before contacting us about the $10 hold on her CC. After we explained it would drop off she still left the 2 star review. If people knew how much hard work went into making a car wash the best it can be, they wouldn't leave bad reviews. My wife and...

The generator is mounted at the top of the curly hose in the bay. The air and liquid are in separate lines until it enters the generator. I'll go up a tip size and see what happens. It is a ultra concentrate but I have only used 2.5 gallons in one year.

I've had the Air Logic system for a year now and still am not happy with it. I have adjusted till I am blue in the face and it spits and sputters. When a customer turns it on it might take a minute before it starts flowing decent and then its still not very good. It has 3/8 lines from the...

Greg I think you are spot on with the valve not opening on the Undercarriage causing the overload to trip. I ordered a rebuild kit and hopefully it will be in today.

Of course I am out of State and my PDQ starts acting up. The high Pressure pump will only run about 2 or 3 seconds. Enough to build up high pressure and then shuts off. I am thinking there's something going on with the 25 horsepower motor. Has anyone ever experienced this and have any idea?

Just curious, I hear a lot of people asking about Everwash but not Touch4Wash. Have you looked into them? BTW, I have neither.

I had this problem on my Razor 3. There is a Y strainer right after the low pressure pump. I took the strainer out as it was crudded up with rust and it improved a lot. I have since replaced with a new strainer.

I bought this one and it works great. I actually find myself using the cylinder more, though. https://www.amazon.com/gp/product/B00IPTVYAS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Unitec also makes an upgraded chip reader for the Wash Selects now.