Search results

QUADRA VAC one motor will not turn FOR FUNCTION 1 traced problem to control, would like to replace BUT NEED TO CONFIRM THATS WHERE PROBLEM IS, 2 MOTORS should turn on for function 1 function 2 is one motor start. if control board is bad replace at $600 a board would like to verify problem kelly...

nice product, very popular wish we could contact them we have a minor problem with vacuum that requires technical support, left messages with Kelly no response equipment been out of service 4 week now. just need to know what part is bad so we can replace and get unit running

made several attempts to get FRAGMATICS information/ parts. no results, no call back.in the past always found them very responsive, not sure what their status is

one air regulator controls pressure to flow jet flow, other regulator controls air mixture making /mixing air /water ratio check air regulators so they adjust and maybe replace flojet

we use the lam motors, the reason is Vac brush replacement is losing 2 screws to replace brushe, vmk motors are harder to change out due to using a metal tap to get under brush's,

WE HAVE DONE SEVERAL UP GRADES IN STAGES LIKE SOAP SUPPLY TANKS , FEED LINES AT ONE STAGE, PUMPING PLANT 2 PUMPS PER RACK, USED SEVERAL RACKS HAVE HAD GOOD LUCK WITH HARD WARE FROM HYDROSPRAY WE HAVE ORDERED CUSTOM MODIFIED EQUIPMENT WHICH THEY SUPPLIED, IF DONE IN STAGES NOT TO PAIN FULL

looking at the pumping ,Maintenace will have to be done, look closely at component location they will break and its nice if its easy to fix, we customed ordered hydro spray units, they were nice enough to change and do some custom build pump/motor stands and install different pumps that they...

620 /623 we have seen a 30 + years of service closer to 40 years life span ( we have close to 25 pumps in service), after a couple years of use we replace inlet seals/cups as they are a ware item, pulsation dampers are a rare replacement when compared to inlet seals/cups. when we hear a cavation...

not happy with pump life span for Gould pumps, use 1.5 hp units with200 psi sfr, unit in bays , one unit was just replaced lasted 3 years before booster pump started losing out put pressure to car wash bays, any recommendations for a replacement pump, realize Gould pump is cheapest way to boost...

would a grand father clause exempt your system, let the new guys handle the problem

as operator of multiple locations we keep a high lever of service with updated equipment. if things are going smoothly we get scared. We get and been brought down to earth on a routine basis by problems all the time. Business requires a lot of different talents. Over the years we have acquired...

if all else fails we have trouble shoot some systems with starting or shutting down randomly . problem was cause by floting grounds in neutal grounds wire in the system resulting a electrical spike. not a common problem but is nasty to find and trouble shoot

spray bleach on Algie

looks like slide credit card will be replace in the near future with tap credit cards, will they reduce credit card claims by customers

you can get the coin belts and they are not hard to replace all Thoe they need to turn loosely when assembled, motors and control are very hard to get if not available. hoppers seem to be throw away after a while, we had 12 hoppers in service until we upgraded to America's latest hopper design...

you cant go wrong with a cummings, try and get off brands fix when they break

we had good luck with idx conversion for foam brush system controller, had a programable unit for air systems, it failed and was not in the mood to replace it and having to reprogram the new unit. converted to idx 10 station unit, it also has lights showing if in use. works like a champ

when we find a pump pulsation problem, pump is overhauled on occasion our experience if there is any pulsation after over haul in the line its throw away time.. damper looks ok on the outside side but you take them off they are full of rust and just plain worn out and are a throw away item

on the issue of head wash out, over 16 months ago we threw out nearly new cat plunger pumps installed on 2 separate new pumping stations and locations , plunger units were removed (cat), after a year of problems with heads and seals failing, we had head's washing out, seals leaking, it got so...