Search results

Guys I think you are meaning to respond to Cantbreak80 about the 3 phase...

I'm with you on the language. I am super nice until they start cussing. I give them one more chance to be respectful and if they keep on I let them have it. Of course they all end with "I'll never come here again" with which I respond, "thanks, I don't want your business anyway if you can't...

Yes, my main reason for turning down the time was because there is not button on the gun, so not only does it spray right away, it is a really strong spray. I have some JC combo vacs with Frag that are not nearly as strong of a spray. Adding a solenoid and gun with a button are a good idea and...

I put in a stand alone Fragramatics frag machine and was wondering what others are giving time wise per cycle? I have mine set to start at $1 and was giving around 44 seconds per $1, but then dropped it down to 32 seconds and now to 28. The gun shoots out a very strong stream, so I figured...

I was working on the pumps one day and had a bay shut down with a cone on each side. An older women pulled up, got out of her car, moved the cone then drove in. I ran over and asked her what that heck she was doing, she said "I just wanted a quick rinse and figured it wouldn't be a big deal"...

It would be nice to have, but the cost is $8500 shipped. That would take a long time to recoup. The smaller machine is just under $6k shipped.

I like the shurvend for the security since it will be outdoors and unattended. I spoke to them an got pricing on the iG4 and on the Visi-Combo. Does anyone have experience with either and how do you like it? I tried a soda machine and it didn't sell much so I am not really sold on adding cold...

I already had a siphoning problem that I took care of by installing check valves in the attic. Then when it siphoned the water flow was not much at all. Not it is a complete weep at full weep pressure. I have them shut off for now, figured I would troubleshoot some more on a rainy day since I...

I currently have 7 drop shelf vendors and one 5 columns little tree vendor. I have room to add a few more or possibly a mulit vendor but it would have to be stand-alone. Are there any good stand-alone multi-vendors that you guys recommend? I wish I could put a multi-vendor that goes in the...

Your right as I have had water running in all bays when a bay with a bad check valve is running. In this case though they all weep even when no pumps are being used.

I will check the discharge hose the next time I am there. Though now that I think about it, I turned off the ball valves on each pump and those just connect to the poly tube that runs from the solenoid, so water has to be passing through as the weeping stopped when the ball valves were turned...

Seat is fine, inside of the solenoid looks brand new. It has only been installed for less than a year, so the whole body inside and out is in great shape.

I actually have small ball valves on each pump that shut off the weep to the guns, so I did that this morning so that it wouldn't be running until I figure it out. I look at it the other way, would much rather have it fixed now while the weather is nice than have to deal with it in the winter...

A couple of nights ago I noticed that the guns were weeping in all five of my bays. I went in to check it out and everything seemed fine inside, (weep mizer was working, solenoid had power) so I figured that it had to be an issue with my solenoid. My foam brush and tri-foam were not weeping...

That might work for the insert, but how about inside the stem itself? Can't fit much in there.

I actually just ran them through hot water then used a small flat head screw driver to scrape off whatever gunk I could. Probably not the best way, but it worked that time at least.

That was the problem with mine but I was able to just clean them. They work great now. Did you try to clean them at all before buying new ones?

I am already at a $1, but for 4 minutes. I will probably go down to 3.5 minutes. Shampoo price I was thinking about $2.50 to start and $1 for fragrance. More than anything I just wanted to make sure that I was offering everything that I could. People mainly want something that works, but I...

I currently have 6 simple Adams vacs that stay busy. They are very easy to use and to maintain and they work well. Am I crazy for wanting to switch them all to combo vacs, or is my reasoning correct that the combo vacs should eventually pay for themselves? Especially since I am getting uses...

Will do. They will hopefully be in tomorrow and then the bulbs in on Thursday. On the website it says that it fits the Maxlight CFL bulbs they sell and those are 12.5", so I figured the 11.5" bulbs should work too. Guess I'll know for sure soon.