Search results

Hazenufyas?

Whenever I need to talk to him I ask to hold and wait until he's available. He never calls me back if I leave a message.

Can't you start your own thread instead of making your off-topic ramblings here?

I've never seen what you have from Ra-Lock before. It almost looks like a miniature safe head and vault that someone cut and welded to your drawer. That looks like a Coleman safe, or it's a Coleman style. They sell a plate with a puck lock that covers the whole face of the drawer.

I use this check valve for everything: https://www.kleen-ritecorp.com/p-1766-fluid-controls-cv-100t-stainless-steel-check-valve-1-4-in-fxf-3500-psi-4-gpm-ptfe.aspx The only time I've had a problem with them was when I put one on a medium-pressure spot free line that was 3/8" OD tubing. The...

I have the manuals with 30 years of extra notes with part numbers for kits, valve assemblies, etc. and I'm not going to pull it out looking for all your "specific part numbers" for your "specific model," but as I said I could and would have told you what you were looking for in literally two...

If you'd said you need the compression ring, nut, and insert like a normal person instead of flooding the text box with "technical jargon" (deliberate misuse of quotation marks), I could have told you that.

I heard the same, haven't checked in a few years.

Mine are like that too, barrels sunk into the islands. I don't use bags, IMO don't need them as long as there are no holes or cracks in the cans, but good luck finding help that won't drag them around the lot. I use the broom and dustpan to keep the barrels as clean as possible so they don't...

That's not an injector system, that's just a solenoid block.

It's still right where it was last time I gave you a link to it. https://www.kleen-ritecorp.com/p-1619-dema-203b-brass-3-8-inch-b-series-injector-ryton-screw.aspx

The guy sells direct. https://x-streamwashsystems.com/ I looked at one in Llano, it's a super simple, lightweight unit, does a good wash, very inexpensive, and no proprietary parts.

My wash gets a pretty decent amount of business from midnight to dawn, probably not enough business to pay for running the lights all night, but IMO the security is worth it.

Did you replace the injector? It's not in the list of parts you've replaced.

DEMA coils get hot. Your problem is still the injector.

You have the part numbers, just call them and order. You have to ask for the correct injector size anyway.

https://www.softenerparts.com/

Someone ask him if he's running count-up or count down, since he can't be bothered to read the post properly. He has me blocked.

Yup, I've been trying to stay away from combining all the common legs because of the issues it can cause. I had to rewire a whole equipment room once because someone swapped a transformer and in the process switched the line leads so everything was 48 volts on one side.

I didn't bother mentioning that because it has started an argument before, but you're right, especially if the transformer has two legs of 120V as a supply. I can't tell you how many times I've seen one output grounded, but it seems to work without a problem.