Search results

See bottom of this page "Vault Options" This cover has the hockey puck lock inside and the attaches to the Tab welded to the door. I would have the welding shop just make it round so it covers the safe head...

FWIW This is why I had a circular collar that fits around a hockey puck lock and a Metal Square with a rectangle tab and hole in it welded to the door. Hopefully they will get tired by the time they get done with the Hockey puck. If I do it over i would likely have the welding shop do the...

I think it encourages people to put more $ in initially. I will take a phot of my signs that advertise it.

I found the NO solenoids particularly touch with any debris in the lines. I finaly went to the Big Box Store and got a whole house filter and put it in line - (As opposed to a banjo screen filter) no more issues.

Have the Diskin single motor - about 3 years - no issues.

If I send straight hot water only to areas I will mot have enough - however water does not to be that hot. Just warm to the touch is enough, so I "T" in cold water that I can adjust thru a gate valve blending im less cold in colder weather and more in warmer weather. This reduces the Hot...

Billboard contracts I have seen are structured as leases. When a property is purchased (unless the lease has a cancelation clause) the purchaser takes subject to existing leases.

Answers to your question may have little import since if the lease is in place you are stuck with it until the end. Also Billboard rental rates may be tied to traffic location meaning one next to a highway is more expensive / pays higher rent than than one on an arterial street. Once told a...

I think I tried that years ago and it was not available. Why do you want this?

Eliminate the pressure regulators / gauges before the manifold blocks. You only need to regulate the air pressure to the flojet for whatever flow you want / need. Since you likely run an .05 nozzle, you can't put 10 pounds in a 45 pound sack. Start with 50 PSI to Flo Jets and -0- to air...

My completely unscientific rule of thumb that has served me well is that if I want an LED to replace an MH with the same light level or slightly better it needs to be about 1/3 the wattage of the MH it replaces.

Got one of these and it was phenomenal but cost 50% more. https://www.shineretrofits.com/jarvis-lighting-x-beam-600-147-watt-dlc-premium-listed-led-petroleum-canopy-light-fixture-600w-equivalent.html

I have used these. Easy to install and worth the price. https://www.kleen-ritecorp.com/p-56872-jarvis-scrt-320-led-retrofit-kit-for-lsi-scottsdale-fixtures.aspx?gclid=CjwKCAiAnvj9BRA4EiwAuUMDf5s3WN2_O4-omJg3qnNB7jAFQpeM-O8eG5vzFcGoT45jK0qpVZHC2hoCQOAQAvD_BwE. You can get better lighting but...

I have had many disk locks successfully attacked in any number of ways. So far, have not had a completely shielded hockey puk lock succesfuly attacked. See photo bottom of this page. You could have a metal shop fabricate something similar...

Simple tet would bee to switch back to regular soap for an experiment and make sure it foams. Always possible you got bad batch.

Houston was where I saw the Changer and Venders "In Jail" There was a rebar cage constructed around them with an opening you could put a hand thru to insert $ and retrieve coins or product but it made it difficult to get a toll in there to break in. That was more than 10 years ago...

Some ordinances indicate violations involving vehicles will result in having the vehicle impounded.

As to the Warning "FREE RIDE IN A POLICE CAR" for loitering - violating city code 1234. Remaining on premises for 10 minutes after washing vehicle is prohibited loitering. . Violators cars will be confiscated.

I use a single G57V pump for all LP functions on my 8 Bay except Foam Brush. For the FB I use a pump for 2 Banks of 4 Solenoids each. I assume all specs are exaggerated but the materials say 5 GPM max. With 8 .05 nozzles that is 4 gpm and the likelihood of all 8 using the same LP...

When it splits are all the branches 1/2" hose?