Search results

That's sounds very similar to the issue we are having. I know that there is soap scum on the bricks that needs to come off. I found an acid that we have in storage and used a diluted solution of it, and that cleaned the soap scum off well. The problem I'm having now is that when the previous...

Thanks for the responses guys. I do have one more thing to say about the bricks. I know that the previous owners had used some sort of acid to try to clean the bricks, but that they burnt the bricks quite a bit. Is there any way to repair acid burns on brick?

The two car washes that I work at were not properly cleaned and maintained before the current owners bought the washes. I'm looking for a couple different cleaning products. The first one would be a good brick cleaning and renewal product. The bricks in the self serve bays have built up years...

We will check that out. Thanks for your advice.

The arms close in front of the mirrors on the vehicles and then bump the mirrors. Then the arms open to home, and the wash progresses to the spot free cycle and then wash ends. The carriage never goes past the middle of the car when this problem happens.

One of Saber automatic washes has an issue where every few washes the butterfly arms will close on the vehicle. The arms close right as our tri-foam cycle is about to begin. We've looked at the butterfly collar and prix sensor and they seem to be fine. The motor and gear box are fairly new so it...