Search results

That is why we are going to stick with the two part swiper and tap for now. Not ready for tap only.

I was looking at the old boiler valve today and it has adjustment knob on it and was set at 4 or 5 (hard to tell) out of 10. Does that mean that the boiler was only running at 40 or 50% of the total rated input? If so then it was heating my 3,600 square feet on about 300K BTU or so.

Android phone have the same high security feature as an iPhone that only transmits a one time use token instead of the actual card number. That way if it was intercepted then the thief could not use it again. The RFID inside most credit cards work the same way.

If going the individual insulated connector route I really like these crimpers and can't believe I crimped all those years without something like them. https://www.homedepot.com/p/Klein-Tools-Ratcheting-Crimper-10-22-AWG-Insulated-Terminals-3005CR/306884697

Are you saying that you just replaced a 73 year old water heater?

I didn't know you could own the dumpster and save. We also have Rumpke because the only other choice is Waste Management and they are more money. How do you dump those big totes into your dumpster when they are full of car parts or bottles of water? (not sure why we get a fair amount of bottles...

Those are really pricey but not out of line for a boiler I guess.

What model are those?

Still have no tankless water heaters installed for DHW or floor heat. I have done some research on boilers vs water heaters for hydronic heating and did not see anything really profound.

I didn't get a chance to talk to him myself (talked to my general contractor) but apparently now my plumber doesn't like the idea of two tankless water heaters for the floor heat. He talked to several suppliers and manufacturers and they say the tankless water heaters will short cycle all the...

I talked to Cryptopay on the phone the other day about the Cryptotap Plus. It is a setup that is used instead of the swiper and not meant to be used in conjunction. They are out there now in customer's hands so if you order some they won't take long to get. They just can't quite make them fast...

I wonder if those inlet shrouds could be retrofitted to existing blowers. What do they look like?

What size tip are you running in your gun?

Etowah Valley booms have been ordered.

I just heard back from my equipment distributor and he can get us the Etowah Valley booms for a really good price. Unless someone can talk me out of them soon we will just get those. Still pricey but could be the old saying "buy once, cry once".

Is this the replacement swivel? https://www.kleen-ritecorp.com/p-1565-mosmatic-40-032-wdg-90-degree-boom-swivel-0-375-in-nptf-x-nptm-2200-psi.aspx

Wow. 6 months? Is this a crazy busy car wash?

Drilling a hole in the bottom of the box might help by draining what water gets in there.

I tried putting in just the insert into an IDX frame (IIRC) and it looked like a drop in but is too fat. The frame would have to be cut out for the QL insert to fit.

We are going with 360 degree ceiling mount offset booms and looking at all options. This is what I have found so far for 6 booms: Etowah Valley Pro with swivel and hose is about $5,600 plus freight. I remember being pretty impressed by these at the 2019 car wash show in Nashville. (I could...