Search results

WOW, the JBS Ceramic is cheaper at $152.58 / 5 gallons and the dilution is 300/1. https://www.kleen-ritecorp.com/p-64794-jbs-industries-10-cc-ceramic-finish-clear-coat-5-gallon.aspx

Does anyone know the final dilution of this? https://www.kleen-ritecorp.com/p-63656-simoniz-s0522005-ceramic-sealant-hydrophobic-coating-5-gallon.aspx At $210 / 5 gallons it should be listed in the description but I didn't see it.

Any update on this?

it's great that Eric was able to help out with this part. But I can't help but think that this is not a Proprietary part. https://www.grainger.com/search?searchQuery=gear+belt+pulley&searchBar=true

I'm driving myself crazy trying to choose a chemical line for my new WW Razor. I plan to order from Kleen-Rite, because I have had a very good experience over the past decade with them. I think I'd like to choose a manufacturer and buy solely from their product line. I have also had very good...

you get a lot more than LEDs and faster wash times with a new touch free machine. Think about everything being brand new. I was looking over the pump stand on my new razor and there is a feature that lets you use hot cold or a mix of both on each low pressure application. You can individually...

I diagnose these problems like this: prox / cable end / cable / relay on input/output card.

It sounds like sometimes the torque from HP rinse is causing the prox target to go out of range slightly from the prox. On my old machine, no prox was 3/8" from a target. They were much closer. If you can adjust the prox closer to the target and still ensure safe operation, that's where I'd...

I like the idea of starting out with everything brand new. Think of all the crud that builds up in solenoids, valves and hoses. Think of the wear and tear on bearings, pulleys and belts. All of the deferred maintenance that's going to cause a failure. For a new operator, it's hard enough...

If your rough numbers are to signify ( hopeful) cars per day using your wash, the multiplier I used when building new was .003, or 3/10 of 1%. I never hit my # based on D.T.C, so for me, it wasn't conservative enough. I think cashless is a bad idea. You never want to limit the ways in...

ceramic coat

Tech-support from Hamilton has always been very good every time I've ever called in. I've only had a few very minor issues.

here are a few pics of my redone gold line. crypto pay kit being installed, plus new buttons and vinyl wrap.

Sexy Lamborghini dealer?????????????

I like soda vending. I would like to refine the process by buying in bulk, maybe 20 cases at a time. The vending machine is more of an interesting and fun thing; not a big profit but it all helps and its pretty easy.

this...

Did you ever think that maybe the car in the first picture had something stubborn on it? It doesn't look like normal dirt / carbon soot to me. It looks more like construction dust or cement dust to me. I would run a number of test cars through if it were me before I went changing or adjusting...

I would go with just a metal arm and no covers at all and run like that till you can get the covers. I would also install something like this. This is not finished yet. it will have a much different look once I add the signs to this framework but it will have a hard stop across the framework...

I'm talking about a full pass over the vehicle; not going from mirror to mirror like the BAS programming.

Not sure yet. I've used the clear and it still looks clear years later, so I think the white should hold up well. It will have a good long cure period before any dirt and water are introduced to it, so maybe that will help, too.