Search results

You need to get the "all In" cost because servicers will tell you everything THEY charge, there are other fees and charges involved. They often tell you what they charge "plus other costs like interbank charges and other stuff that goes to other parties that they do not control.

OK, so I looked at the spreadsheet with the post and I am not sure I understand it. There is a cost per foot and seemingly a cost per time. I am guessing only the cost per time matters for the SS. While the cost for the "Waterfall" tunnel wax applications is high I submit that most of the...

I am sorry, but the link takes me to a page with lots of math so I don't know which post you refer to. If it is tunnel mth, it does not apply to the SS since the Tunnels use a waterfall effect for show which uses huge volumes compared to volume dispensed by a foam brush type application.

I clear thru first Data with Cryptopay. However my EE uses the same system. While this may ad more transactions thatn the average SS it does not really ad more larger dollar transactions since the base wash ios $3.50. All in exclusive of internet connection it is running about 6% a month...

I suggest that the first thing you do is review the ordinance. If the sewer rate is pegged to the usage rate then you are spitting in the wind trying to avoid this government lie. They call it a sewer or waste water rate irrespective of the fact that there may be a huge disconnect between...

This may sound stupid but the 2 pins / set screws are tiny. Are they allen heads? Also, what are the dimensions of the short versus long so I can ask if I am ordering the correct one since KR apparently only shows one. If they are roll pins, where do I get new ones and the punch. If they are...

Got open my Coleman Drawer vaults with T Handle Medeco Locks. Do not think I damaged the housings. Now, How difficult is it to replace medeco Cylinders/ Knock out pins on side of T Handle? Where to obtain cylinders? Same as Medeco Plug Locks or different?

Perhaps not a perfect, but a realistic profit model: Let’s assume for the moment that the Tunnel product and SS product and the dilution rates are the same. Let’s also assume that the SS delivery volume of the diluted product is the same as the delivery volume for the Foam Brush is 1/20th =...

Not really becuase the delivery systems and the "Desired effect" of the systems differs radicaly from the tunel to the SS system. The tunnel "Waterfall effect" requires and wastes hhuge amounts of product. Those machines can't even use a flow jet which is rated ta 7gpm becuase it will not...

FWIW It's now been quite somete since I had any issues with one of my Vantage acceptors. Maybe some kinks were resolved.

Sweet. Who makes that bill box?

1. We have used masking tape for a long time. As it gets wet from the wash and from rain it tends to fall off over time. Also, whenever the customer exits the car after the wash it's a simple matter for them to pull it off. 2. Yo may be able to solve the rinsing problem easily but it will...

Foam just gets on the surface of the cloth or vehicle. Applying to the top of the curtains and in betwen as they move and similarly with rotational devices coats the entire surface of the material keeping it clean and slippery so as parts of the car or protrusions get in between the material...

My main building has the internet connection, not the SS building. The coordinater is about 75 feet from the neares swiper. I had to play with it, finaly placing it in a window for it to work. So, aside from distance, the construction of the buildings and other obstacles may be important factors.

FWIW I asked a cloth mfgr which did a better job of lubricating. Soapy liquid applied to the cloth or foaming the soap on the vehicle. His answer was soapy solution applied to the cloth.

2 Xarnut 2 and Bmattivi, Soap should be injected into the cleaning solution, not just water. Test the solution being sprayed on the cloth. JUst because the MSDS sheet says the tuff has lubricity does not mean the injection ssytem is working correctly.

I can only guess vis a vis the autec unit. As described it seems that the PS wiper at rest has the tip to the right. The cloth could catch this tip as it comes across the fender. One problem unique to a gantry unit is that as the coth moves across the mitter not only moves from the from of the...

Not really familiar with this unit. Is it a "Side to side" mitter?

I thhink a concern for adding a bill aceptor to the box would be security concerns. How will the new door be concerned. Do you anticipate issues? If so, perhaps a seperate box is a good option. Ifd they trrash the seperate box trying to get bill the bay will not be out of order.

While I would be the last to say ICA did not need some more ideas for the shows, I do not know that the org can be faulted for lack of SS stuff. I think the type and quantity of stuff is driven by what the mfgrs want to pay to present. Talked to one of my local SS distributers who had gone...