Search results

31 gallon steel can from lowes fit in mine. had to put a couple blocks to keep the lip up close to the top for lifting the can out.

You can see the samurai shield in the high pressure rinse, not as strong as the soap, but there is some color and slight sudsyness and it smells like pina colada, except I am putting it on a bit weak for me to smell it in my wash. It beads the water up great.

Using their Samauri Shield in our high pressure rinse (D&S 5000) and it seems to work with very very little chemical being used.

I jumped on this. I figure it will pay for itself in 3 or 4 orders based on what KR has been charging on shipping.recently.

back to the site last night. Program held. killed the breaker to the goldline and turned it back on, programming held. Guess I may never know what happened but everything was lost. Date, audits, even the non resettable balances. all zeroed out. Oh well... just another day running an old car wash...

Yes cryptopay. No Memory Data Altered message but it was altered. We have had a lot of weather lately. maybe lightening. I had a 220v breaker on my RO unit trip a couple days ago, reset with no further problem, don't know what happened there either.

What concerns me most is it lost the perpetual data. Its like the machine was born yesterday, except a lot of the defaults were there, they must be burned in on a chip.

That was my initial thought but I find no reference to a battery in the manual, Also, the manual says it should display a message if the data is corrumpted and shut down, it was still saying welcome, select a wash, just the prices and washes were all messed up and the date was gone. If there is...

Went to the wash this evening, figured I'd run my car through the old D&S 5000 to check it out. The Hamilton Goldline was acting goofy, using wrong prices, lost all audit trails, etc. After a lengthly trial and error reprogramming session, it is back up. Any ideas what may have caused it to...

I am currently running 2506 only because that is what came with the guns I got from Kleenrite. running my auto bays at 1000psi and my truck bays at 1400 psi. still had a guy cleaning his dump truck complain of low pressure but do get plenty of stuff blown on my walls in the truck bays.

I appreciate all the help you guys have given over this first year. I will say one thing I've learned.. I now love pollen! this probem only came up because we got so busy. guess never had all 4 bays in use at same time with 3 using HP. that or whatever is blocking the valve has built up enough...

Found it this evening. there is a float switch in the rinse tank when 3 bays are using high pressure, there is not enough water coming in to fill the tank. guess I get to learn to rebuild one of those watts diaphram valves. found 2 used ones and a couple new diaphrams in the storage shed...

One more piece if info. the IBA with 25HP pump motor starts and runs fine off same breaker box.

Had the busiest day yet since renovating this old wash (D&S pump stands). today when I arrived at the site. 3 bays in use, all running High pressure. the pumps were starting and stopping intermitently. Went to the equipment room suspecting maybe a water supply issue, but the contactors were...

I'm worried about things flying around where people can get into them. My wash is really open and unattended. Less chance of catching antennas etc. Lots of mudders in my area too. Just seems a bad idea for now. I have located a replacement gantry for the old D&S 5000 so will get it going again...

Thanks, don't want anything with brushes.

My D&S 500 gantry is twisted beyond further use. I settled with the insurance company for the cost of replacing it. For what D&S wants for the gantry alone, I could get a complet new inverted L from someone like Sino Star, and there are simpler less expensive options as well... I searched and...

Budget is limited to the cost of replacing the damaged gantry,(35K) not the whole system.. looks pretty nice though.

Thanks to a bad driver and a good insurance company I am in the market for either a new gantry for my D&S 5000 or possilbly a used IBA to upgrade. First question, anyone "upgrade" from the 5000 to the i5000 gantry? Pros Cons? the 5000 is made of stainless, the i5000 is made of aluminum I don't...

My first winter in the water pumping/dispensing business (car wash). We have weathered a few overnight lows a little below 30 with no ill effects, weep is working and although my laser thermometer cant detect any heat on teh cable, the heat cables must be working as we didn't break any poly...