Search results

Anyone done a roof mount? as we have a flat roof no attic

That'd my concern. But I would also like to give a better experience and a cleaner car. I've tested with my personal car and if you foam brush it's clean but without it there's still a haze on the paint.

I think I'm going to go with presoak. Can any harm be done by using a high ph presoak in a self serv application. My supplier has one that says it's good for the road film and salt film things get in the winter but I just want to make sure a customer can't do any harm to themselves or their car...

We have duraslide and so far like them only had them 3 months but so far seem good and way heavier duty

Il have to check it this weekend

Thanks guys. Must just have an undersized float valve then. With the float valve and a hose on the same circuit wide open I sill have 48psi of water pressure.

I was saying open the hose that's on that same water circuit as the float valve all the way and monitor the pressure drop

Yes it's just regular water we don't have spot free yet. Il have to open the valve all the way and see how much the pressure drops

So I'm way over sized on my holding tank. Wonder why. Previous owner said it was all that way when he got it 12 years ago crazy to think it was all for no reason

2508 tip at 1000psi. I don't expect to be at 10gal/min but I like to plan worst case scenario 2508 tip at 1000psi. I don't expect to be at 10gal/min but I like to plan worst case scenario

City pressure runs 50 to 60psi. I do remember the previous owner saying that on the very buisey days he would have to use a hose to help keep the water level up but the hose is on the same leg as the float so I could probably just upgrade the pipe size and float. I know those pumps are about 10...

What is the general rule of thumb for reserve water capacity per pump I have 4ss bays with cat 820 pumps just got the wash and have a 300ish gallon water tank that the pumps pull from would like to go smaller and free up some space in the pump room but unsure of how small would be to small

Do you have the dryers in all bays or just some? How many customers out of 10 would tou say use it?

Is presoak Does the presoak require a new gun or can it be pumped through the hp wand

Is there any special maintenance with the dryers? It was a let down on the few I've tried I used a brand new one at the expo and it was great.

Looking for input on everyone's popular in bay options as far as soap,bug,tire cleaner ,presoak,foam brush. Currently just have soap rinse wax and foam brush. Wanted to add air dryers but I've went to 4 diffrent washes one being kleenrite branded wash and none of them had enough air flow to do...

I am in the process myself wireing a nayax and led6 to my self serv bays I set it up on the work bench to verify operation before I install in the bay I'm waiting on nayax to set up my account at this point its been 3 weeks so far

I ended up mounting a small camera aimed at my universal board so I can monitor money in aswell as and error codes or issues in real time so far is working good

American changer ac1005

Does anyone know if there is a way to monitor remotely the amount of cash your changer has excepted I can only seem to find out