Search results

I called River City Water for parts. They asked me to check the pistons first. I used a plier to try to push and pull it. None of the pistons moved. I tried to reconnect the pistons to the gears. Only the top one fitted. The lower piston had probably been jammed, and when I removed it from the...

On top of the device connected to the top black gear, there is a switch with a broken shell. From the picture of img707, I can see the inside of the switch. Could this be the cause of the problem?

http://img707.imageshack.us/img707/222/38745909.jpg http://img189.imageshack.us/img189/1006/95446221.jpg http://img534.imageshack.us/img534/5048/23238181.jpg I checked the count down dial yesterday, and it had moved. In fact, it was moving when I was...

I use insert image and type in the link, but only the link is shown here, no image. If you somehow can see the picture, this is what the picture shows: The left side of the picture shows the count down dial, next to it is a red button. Below the red button is the knob. To the right of the red...

I took quite a few photos, but I cannot attach them with this message. I keep getting this message: upload of file failed. How can I attach photo? I will check the counter down dial and see if it has moved or not next time I go to the car wash.

I pulled the cable from the little gear on the panel, but when I tried to pushed it back in, it only went in half way, no matter how hard I pushed it, is it OK? Anyway, let me first get the terms of the parts straght. The white face disc on the back end of the knob is the meter? The one facing...

I looked into the control box on top of the resin tank and saw a round grey color looking device behind the dial panel. Is that the motor? If it is, I think I can replace it myself. I just need to know where to buy the part. Also, the instruction on the panel says the cable must be removed...

I looked into the control panel on top of the resin tank and saw a round disc like device behind the dials. Is that the motor? If it is, I think I can change it myself. I just need to know where to buy the part. Also, the instruction on the panel indicates that I have to remove the cable before...

My water softener system is fourteen years old. Recently, the flush cycle seemed to take a long long time. I turned the dial in the control box on top of the resin tank, and the cycle gradually came to a stop. However, now the system does not go through the flush cycle anymore. I wonder if...