Search results

You have some good starting points to start your troubleshooting between the 2 threads you are asking the exact same thing in.

Better yet, tell him to come out to your wash and fix the issue

yes, we have 3 bays on original 20 year old 3 hp motors with 5cp pumps. works fine.

Hard water will effect how much chemical is needed to foam and look good. Your chemical supplier should be testing all of this and setting up your chemicals for you. That is one of the main purposes of using a local, knowledgeable chemical rep. If your current supplier is not doing this, you...

Dilution on jug is usually a good starting point. Red is way too big of the jug says that. This is probably the best place to start

There are way too many factors, no one on the internet is going to be able to tell you which tip to use. You can probably get a starting point if you say the exact chemical you are using. If you are using a chemical supplier, they should be dialing this in for you. Red tip is like 20:1, and you...

You went from red to purple? That's a huge jump. Are you getting air to mix with the chemical mix, sounds like you are missing the air

So you have continuous full flow before the solenoid and low flow after a short period of time after the solenoid? Both with and without the guts in the solenoid? I'm trying to follow where you are having full flow and where it is dropping off after some time. Maybe worth putting inline pressure...

I just ordered some security tokens from them, they are still around. 800-488-2646

Other option is to mount rubber door stopper/bumper onto the wall where the boom rests, that works well also.

Could also be a partially collapsed or kinked hose that's not easily detected from outer visual inspection.

Did the flow stay good directly after the solenoid without any other plumbing attached? Did you try this valve in another razor? One test would be to remove the guts out of the solenoid and manually turn the water on and off to see if you get the same results. Disconnect the coil if you do...

Coil hoses are a pain, we only use them when we absolutely have to - ie no boom. we prefer the straight hoses when a boom is available

If you have a boom, highly recommend NOT to get the coil hoses.

I want to be your distributor if this is your solution for problems! 😂 Disclaimer - I am not a distributor, but can start a distributorship just for a customer like you hahaha

KR has add on boxes for dixmor display timers and credit card readers. Display timers are a must in this day and age, customers expect them. Just my 2 cents

If someone comes back to this thread later, never figured this out, problem kinda went away, and was forgotten about. Whole pump was replaced with a new one. hopefully that fixes it for good.

Quick update if anyone comes back to this thread in the future, had to replace the pump 1.5 years after rebuild. Motor started over-amping and pump was not putting out correct pressure. As I stated before, I would have just replaced with new originally, if I had known then what I know now.

How long are these doors going to take to go up and down for every wash with those openers?

Can't help on where to get it or manufacturer, but if you don't find it, probably can get it 3d printed by a local company if you can't find it