Search results

Thats the same one, but the newer ones dont hold up very well?? I have gone through a few of these lately. I take them apart and make sure the diaphragm is properly seated and I also now add some rtv sealer to keep everything in place, they are a "pita" to change. On the bypass setup on a...

hahahahaha.

I did 2 Coleman wash cleanouts and have refurbed 20 Coleman oval vacs. I would say I put between $$500-$1000 into each depending on the needs. Coleman makes a nice vac. with the large chamber and all the bags in the motors seem to last a lot longer then the old monorails and Adams vacs I had. As...

You wont get it apart by turning the stem. After you take the coil off you will see 2 small holes in the ring around the stem, if you can a screwdriver or long ceter punch and hammer them in a counter clockwise direction that ring unscrews. Kleenrite has a rebuild kit for that. Its not simple...

I have my 2221 set up as follows. Only dispense tokens dollar bills only on one side, also on that side has a cryptopay swiper, swipe is a $5 swipe for 6 tokens. Other side is 5's, 10's and 20's. Much easier for sorting and people use more larger bills for the bonus coin.

I have blowers at my 3 busiest bays at one location, they always were my busiest bays, but are even now more busy. I just purchased 4 for another location I just rehabbed and will install once I get all the ancillary parts for the install together. Once situated I will add to the remaining bays...

get in touch with Randy. He will take care of you.

you can pour oil dry into the pit allow it time to absorb oil then it sinks to the bottom then you can clean out the pit. Also if it is not alot of oil, break up styrofoam into smallish pieces and throw it in there for a few hours then scoop them out, the oil is attracted to the styrofoam.

Every one I ever did, I left the pump head Or Volute #1 on the vac and just used the new motor and remaining pump parts. On the Coleman vacs every time I touch any of the hoses I spend hours trying to keep them from leaking.

There is a company out of Philadelphia: KB Lighting. They have unbeatable prices on vaportight fixtures with led bulbs. A 4' fixture complete with bulbs around $75 depending on # of fixtures purchased. They have any kind of lighting for all needs. Worth a call. 215-673-6400. I have no...

I have a new Unitec Portal Ti. I like the machine, but I would highly recommend "NOT BUYING UNITEC" their customer support is totally worthless. If your machine goes down you have to go online and make an appointment for them to call you back. If you are very lucky you might get a call back same...

Well took way too long to finally get to the ICA! Been in the business for 15 years and this year was the first one. And last minute decision at that. I have been going to the N.E. Regional show for years, but have just found it too difficult to get away for the amount of time needed. I really...

There are several people on the way. A few of us on the shuttle a few minutes ago wanted to run to rooms to change. will be heading there shortly.

Just rinse it out with High pressure, it'll be fine!!

I have 2 Washworld HV's, both have standalone dryers. I would bet that more then 50% of the people just blast right through them. Under 10 seconds, 30% maybe 20 seconds, 10% use the complete 45 second cycle. and the rest just dont pay attention! Also with standalone dryers I can start loading...

Since Randy wont be there I will try to stop by and meet you all.

For my self serve bays I have a regular Intermatic timer turns on 1 light over selector doors in each bay. Then I have an Omron plc that I tied each bay timer into. When Timer is running 3 more lights in the bay come on. I set a delay for light to stay on for 10 minutes after timer goes off for...

2AM. He tried to get a bath!! I got paid! https://www.facebook.com/magictouch.carwash.3/videos/vb.100000227461105/717706434913599/?type=2&video_source=user_video_tab

I have american changers and and put cryptopay swipers on them. I just put a relay in to send the pulses to the changer. I set it up as each swipe is $5 or 6 $1 value tokens. One location doesnt get much use, newer location is getting much more use as time goes and they learn about the bonus token.