Search results

All my bays are chained to one transformer I have 24v to orange wire I noticed the three ground wire pigtail had green death I cleaned that up. The led 6 keeps blowing that black tab thing on board there's two side by side If I just plug led ,6 in it's ok till I go to hpsoap or rinse and pow...

I bit the bullet last year on mine from Culligan $4500 Twin tank lot more efficient than my old one actually glad I bought it.

My jobe valve is on the frits i think im going to steal the the foam board idea till monday when i can get one

On my old machine we could not figure anything out changed everything to find out that the treadle was bad once in a while it would stick and send a signal when no one was on it. And car wash would always read bizy or car in bay then put it self out of order

https://www.kleen-ritecorp.com/p-11623-hamilton-changer-part-11-0008-dual-coin-switch-for-hopper.aspx IM PRETTY SURE THIS IS THE PART I BOUGHT FOR MY HOPPER ALSO WATCH THE BLACK BOWL SOMETIMES IT GETS CHEWED UP AND WARPED THAT CAN BE REPLACED TO

Listen to randy i had same issue last summer there was a little goober under the coin counter switch

Showed up today How rinse running in bay All the functions run with no money Open timer not sure what it is but square piece burnt There r two small square things side by side The one is fried ????? Scared to put another one in roasted two thus far same square tab Took bad one to another bay...

Figured out the wiring with the help of a friend

easy way for me to tell if soap has fell out is put a few drops of simonoz surfactant right into the hyro tank and you will have suds in a second, if no suds then you have bigger issues

After chasing every wire this guy hooked to that dc power supply i found the one blowing the fuse marked sign, i knew it i though it was getting wet unhook sign still blowing, drive my self nuts why is it still blowing follow wire back guess what doesnt go to sign even though its marked sign...

I know it's like clockwork I just told my assistant I say usually blows at 30 cars and I made it to 27 and I'm here digging in it now. DC Supply get so hot that it just shuts itself off doesn't even blow itself with a 5 amp fuse just gets too warm to even work so I put a cool down one in there...

so why's the fuse blowing :)///

ok thanks what would have caused it to read carwash bizy out of the blue

Does it power off having the same problem except for it's blowing the 24 relay fuse so it's pretty much lights out in the jobox

Correction SYSTEM STOP

ok things got weirder or maybe were on to something i left the wash by the time i got home it was out of order again and fuse 1.5 in 24v was blown error EMERGENGY STOP this time machine was in home position and hadn't washed a car for at least 20 minutes the hamiloton 2" displayed read welcome...

I usually don't get an error but one out of three times it may say emergency stop I think I've seen trolley left before 2

Here we go Emergency stop is an acquired up in the bay The fuse in the relays at 10 a.m. p The replacement 24 that I bought as a 1.5 fuse in it I'm assuming the 1.5 is the correct one not the 10 Just another one of my ding dong installers fix its So replace the 24 with the 1.5 and fuses blew...

I get it from National Pride U can buy online $70 5gallon It burns I don't cut mine U should dilute to half and try if not just lay it on . Becarefull at full strength around certain plastics and metals. On SS it's amazing, concrete, walls etc I hose everything down with it every spring. On...

Hello, past week ive showed up and the wash was down unable to move at joystick in the jo i notice the 24ac to dc pack is not on little red lite pop the fuse its ok put it back in and all good any idea what could be causing this is the 24pack going bad it does seem to be hot to the touch...