Search results

THANKS WHATS THE GOING RATE?

ANYONE STILL RESLEEVING 310 HEADS PLEASE THANK YOU

LOOKING AT UPGRADING TO A RAZOR SOMETHING THAT WILL SQUEZE INTO A 14.5' WIDTH 25' LENGTH 10' HIGH STAND ALONE OUTSIDE DRYER ANY OPTION, THANK YOU

HOW HIGH IS YOUR CEILING THANKS

What's the ceiling height? Thanks 🙏

Hello, any place to get the heat strip on line with the hole in it for the virtual treadle eyes 24v20watt thanks only place i've found in the past was Harrels thru PDQ thanks.

PDQ DRYER , THE WASH SYSTEM LOOKS LIKE A *XTREME WASH I THINK IT IS CALLED

JUST THROWING IT OUT THERE ANYBODY INTRISTED OR HAVE SOMEONE THAT WOULD HELP ME INSTALL A 4000. BE HAPPY TO PAY IM ONE MAN AND VERY FAMILIAR WITH MACHINE BUT WOULD BE NICE TO HAVE ANOTHER EXPERT ON HAND. THANKS, ALL HEAVY WORK COULD BE DONE BY ME WOULD JUST LIKE SOME HELP WITH FINAL WIRING...

ya not sure whats going on boss. on mine soap 1 and 2 options are for the arch. theres should be 3x option or poly for the 3x pods. your cycle on machine should be: soap 1 then soap 2 then 3xoption, then rinse, then spot free etc or somethng of that order. soap opt 1 is on u should not be...

ACTUALLY PULL THE HOSE OF THE POD AND ACTIVAte see if fluid comes thru if you got good water pressure at the machine the pods maybe plugged inside there stuffed with foam pads to help foam and the get jammed up against the holes

THOSE ARE FOR THE TRIPLE FOAM NOT THE SOAP . REGULATOR ON THE MACHINE PUMP STATION 90 PSI 419-512-3986 SEND ME VIDIO OF WHATS HAPPENING IF THERE SPUTTERING MIGHT HAVE TO MUCH AIR PRESSURE, ARE THEY DRAWING LIQUID? COULD BE A CRACK IN HOSE CHECK ATTIC AND LINES FOR LEAK,, IS LOW PRESSURE...

GIMME A HOLLER 419-512-3986 WOULD LIKE TO HAVE A LOOK PLEASE THANKS

NOT SURE WHY IT STOPPED. BUT UNDERCARIAGE EYE AND FRONT EYE I THINK ARE SOME ERROR. U MIGHT HAVE TO CHANGE ONE OF THE EYES. WATCH AND SEE IF UNDERCARRIAGE COMES ON OR NOT. I THINK YOU GET MOTOR RUN ON ERROR WHEN IT MISSIS SOME CYCLE.

FOAMS FROM THE PODS? THE ARCH YOU MEAN? COULD CHECK THE MANIFOLD THE FOAM TUBE SOMETIME PUSHES ALL THE STUFFING TO THE END AND CLOGS. OPEN UP AND DIG OUT AND RESTUFF WITH FOAM WASH PADS OR SIMILAR. MAY ALSO HAVE TO MUCH AIR PRESSURE I KEEP MINE AROUND 90.

Completely different post but I'd like to replace my gearbox on my gantry anybody have any luck with just grabbing a Wash world high velocity gearbox and motor do they fit in universally. Thanks

Green festoon yellow number 10 going x17 from j4 to J2 was pancake in the festoon holder which would make sense why I would get Arch rotate first thing in the wash but once electricity started going through it it was okay. How I realized it was I set my phone on video in front of the Jo box when...

Hello time to change the gearbox getting a little drift in home position on the gantry. Are the Wash world high velocity a direct match throughout the 4000. Bolt pattern/shaft size things like that or am I going to regret it. Links if know a place. Thanks Problem If u push on t...

After watching videos it is not trying to move right. Its getting to back of car on driver side and from what i see it misses 180 and rolls into 270 and hits the t bar i beleive if t bar wasnt there it would try to come to -0-. thanks but all arch x1151617 new and coming on when in manual...

Mines doing the same thing lately.... Always happens first car of the day around 730am. Goes down driver side and when it turns to go to back of car it over rotates and hits the t bar. Same spot every time. So every morning i have been taking the trolly to middle and spinning around a few...

I have some new rebuild kits and extra valves if you like i was going to repair mine and just decided to switch over to the wash world solenoid block which i would recommend. if you like reach out i ship to you for half of what i paid for em and give ya the extra parts for free.. I think i...