This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I’ve just opened my IBA and would like to put operators on my doors that will wire into my control panel and operate when a customer pays and completes a wash. I have roll up, drum style doors that are 12x10 and can only be manually operated via chains.
I was quoted 2 liftmasters with a “car...
Greg, I’ve had a couple techs take a look at it. Had the production pump and delivery working, but separately. When we try to get both online, it’s blowing fuses and the contactor won’t stay pulled in if the fuse doesn’t blow.
Incoming quality is 134PPM
Pressure at about 70PsI
I have a small...
What RO unit is everyone recommending on a small-town wash budget? Would like to deliver to SS bays and IBA, but IBA is my main focus. It’s the only thing holding me up from opening my IBA at this point, and can’t get an old unit running. I already have softeners and charcoal filter.
Here’s the diagram + the error. It seems very straightforward, outside the blue wire only says to utilize Pin 5, not J1 Pin 5. Is there a standalone Pin 5?
Hey everyone,
I’m trying to retrofit a Monex Credit Card terminal on a Unitec Wash Select II via pulse. Monex and Kiosoft have sent me diagrams, but I still get an error on boot up. Can someone clarify how this should be wired in?
Hello Everyone,
I'm currently trying to revive a 20 year-old RO unit that the previous owner did not take care of. It's the Ginsan Water Lovers RO, 4400 GPD.
I believe the production pump is good, but both delivery pumps (for self-serve and automatic) are toast. The motors are good, but the...
With the Ginsan system this is not an issue, when TF is selected a NO solenoid on the TF unit is energized turning off the weep. Those solenoids are fed by a main weep solenoid on the pump stand. Talked with Dan @ Ginsan about it today.
Hello Everyone,
This is my first winter as a car wash owner. I’m located in Alabama and do have my weepmizer installed. I have triple foam and foam brush, and I’m not sure if I need to weep both or run antifreeze soap. Any insight would be appreciated!
Hello,
I’m averaging 12-15 seconds, no matter which bay I’m testing, to get low pressure functions to the bay. I have the Ginsan Ultimate System that utilizes three FloJets for three LP functions. I have Tire Cleaner and Presoak set up to run thrI know there are a lot of variables, but what are...
Thank you for the response. What are you guys doing to ensure dry air? I have air regulator/filter combos straight off the compressor and then again right before my low pressure system.