This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Replacing an old unit and we are seeking opinions on how many wash options do you offer on your IBA ? is 3 enough if you have the option for 4 would you use 4? How about pricing spacing (Example $10 bronze $15 silver $20 gold $ 25 platinum) Just curious to see what others are offering? Any...
Thanks for the info and manual I will make some changes and see what happens All three soaps are new. I see there is supposed to be a foam generator I will have to assume they are up in the trough because I don't see them by the machine
Keno, Waxman, David Thanks for the input...I have pulled and cleaned the solenoids I will try a larger tip also how much should be in the tanks mine fills about halfway do I need to adjust the chain? Also do you know the Gin-Sin dip settings to increase the time to 16 secs. What Size tip on the...
New car wash owner so please be gentle....I have 3 tanks with hydro's for the three colors they all have 24vac solenoids at the bottom of the tanks the Gin san timer system is set with 8&10 on for time (i think 10 secs change?) change I checked and it rotates the voltage on all three solenoids...
Update: Have you ever chased out a wire only to find out the line you have been chasing is the wrong one ? it got mixed up with all the others that look exactly the same? well that is what I did and the 24v I was seeking was not on the presoak but the soap. So found the issue only after some...
So this is an old school set up the presoak tank with the hydo is gravity fed to the 6 solenoid block . Once the solenoid opens it runs to the inlet side of the pump (like the weep system) the pump pushes it out to the wand The issue is the solenoid, nor the pump runs when the rotary switch is...
So I had a customer complain about the pre soak in one of the bays. Checked it and sure enough just a little trickle when turned on so I checked the other 5 bays and the same thing is happening. I checked the solenoid block and no 24vac on any of them and the pumps never turn on either that...
I just wanted to chime in on this we had a leak that was like your and we used this stop leak and it worked!!
Amazon.com: Fix-A-Leak by Marlig for Swimming Pool Spa Hot Tub Leaks 32 oz,White
It is thick so stick the bottle in hot water for 15 mins before adding it to the boiler let the pump...
We have an older (1999-2000) Mark VII GT 500 It works but we are replacing it. If anyone is interested in buying it as a whole or for parts. DM me for details and photos The machine is located in the Cincinnati Ohio area, We would like to have it gone by ASAP. It must go let's make a deal
Ok just an update on this no relay was needed all that needs to be done is use pin 9 on the Dixmore timer this is good on the LED7 type or the 2000(2) above timer Pin 9 to Pulse 1 wire from Nayax With that said you have to have Nayax send a pulse (multi pay options) or up count (single pay)...
Seeking some help here I have a new Nayax I am wiring into a bay that uses a MA850 acceptor and it also has a Dixmore Screen on the top that shows the correct amount to deposit to start and signage On the Nayax I have narrowed it down to only needing the two black wires for 24v common terminal...