Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. D

    How to calculate the amount of glycol in my floor heat?

    You might want to go a little heavier on the glycol concentration just in case you develop a small fluid leak. Your boiler should have an auto fill valve to add water to the boiler if water/glycol level drops. If there is a leak and the fill valve starts adding water and glycol mix gets a...
  2. D

    Foam Brush Pressure?

    I had trouble with old foam brush soap making good foam... when I replaced with fresh soap the problem went away.
  3. D

    Water & sewer bill

    My commercial water rate for the first 1000 gallons $8.75 then for 1001-20000 gallons it is $5.38 per 1000 gal then 20000+ it is $4.25 per 1000 gal. Sewer rates are $7.25 for first 1000 gallons, then $5.20 per 1000 gal. What I love is that there is a commercial water rate and a residential...
  4. D

    Imonex Vacuum Coin Acceptor

    Thanks for the suggestions! I have some time tomorrow--hope I can figure this out...
  5. D

    Imonex Vacuum Coin Acceptor

    I've been getting a complaints about one vacuum not working. The complaint is always the same--put coins in, but vacuum doesn't work. I've tried many, many times, but I can't duplicate the problem. Every time I check how many quarters are in the vault, it is an odd number. I'm guessing...
  6. D

    Close car wash in winter? Need advise

    Ric--I've got a setup like you're describing. I went to a local semi-truck tarp supplier and they custom fabricated a rollup door out of a heavy duty tarp. It is fastened above door opening with a strip of aluminum and tapcons every 18 inches or so and have a rope and pulley setup to roll it...
  7. D

    How's Business Been?

    My salles are up this year over last year also. No special promotions or advertising. I'm just checking the wash twice daily and keeping it clean and well maintained.
  8. D

    The recession is over!

    I found a dime and a canadian quarter in coin return slot...
  9. D

    Police came to my wash today

    I had something simiilar happen this summer. Customer complained that my high pressure "sandblasted" his paint off... Customer left me a note then went to police and filed a report. Police came to my house later that day and talked to my wife. I turned everything over to my insurance company...
  10. D

    Weep Water

    My wash froze up pretty fast too at 10 deg F without weep water after water main broke and it was shut off for 6 hrs. A phone call would have been nice, but I guess that was too much to ask. As long as I keep weep set to 16 oz per minute it works fine with cold water. I was worried when temps...
  11. D

    Suggestion box

    I have a simple mailbox mounted next to the bill changer where people can leave refund requests and make suggestions or comments. I keep a few blank post-it notes and a couple of pens under the mailbox lid. It often helps me find problems faster as people leave notes requesting refunds and I...
  12. D

    Cold snap thinking about closing

    How do you test the antifreeze in floor heat? Do you just use an automotive bulb-style antifreeze tester or is there a better/different way?
  13. D

    Key Scratches on a windsheld

    I need some help... We had a lot of freezing rain the other night and I wanted to get home. It was a long day. The ice was so thick my scraper wouldn't scrape the ice off of my windows so I did the very stupid thing and in frustration took a car key out of my pocket to get thru the ice so...
  14. D

    Floor heat Insulate or not

    Yes, insulation does help. We used a product from our local heating supply house called insultarp: http://www.insulationsolutions.com/products/insultarp/information.html
  15. D

    Foam brush handle holders

    I've been using some simple vinyl coated "gripper clips" from Reid Supply to hold foam brush handles. I think it is part number GGT-5 and is about a buck and a half each.
  16. D

    Insurance poll

    Switched to Nationwide one year ago and rates were lower. They did an audit of my gross sales over the phone.
  17. D

    air compressors

    The main difference between a single stage and a two stage compressor is the maximum pressure. A single stage can typically put out about 120-130 psi while a two stage can go up to 175 psi. If you don't need the higher pressure, I would go with single stage machine. It takes a little more...
  18. D

    Hot water to SS bays

    I have one Paloma PH24 per bay. It feeds a small reservoir then goes to pump inlet. I think that one Paloma could be able to feed two bays, and that is my backup plan in case one fails, but I've never tried that yet... Even on coldest day with thermostat in middle between cold and hot, water...
  19. D

    Comment found in box today

    I received a note today in my box that I use for comments, suggestions, problems, etc. that I give too little time for too much money so they were going to keep going to my nearest competitor. I have a $2 startup and give 40 seconds per quarter, competitor has $1.75 startup and gives 42 seconds...
  20. D

    Wood Boiler Consumption

    There is a wash nearby that uses an outdoor wood boiler. It is made by Central Boiler. I spoke with the owner after it was installed and he seemed pretty happy with it...
Back
Top