Search results

  1. T

    Open for Business

    Dollar coins , less time depositing time & more convenient for the customer. Less chance of jams less wear & tear on change machine & coin acceptors.
  2. T

    Belanger parts

    This is what I found: Hey also for you vector kondor owners just a FYI part #6100 which is the bearing used on butterfly is off a 83 Buick skylark ( frt wheel bearing) . You can get it at the auto parts store for around $50. Belanger cost is $180
  3. T

    Belanger parts

    It was posted here on the forum somewhere but I can't find it. I think it said and 83 Buick Skylark is what the bearing is. But I'm not sure I can't find the thread.
  4. T

    Belanger parts

    What model machine?
  5. T

    Vacuum boom retrofit

    The booms are modified air shammee booms. Not cheap but cheaper than anything else out there.
  6. T

    Vacuum boom retrofit

    Mine is more of a homemade setup. It works well stopped 80% of the hose on the ground. And post number 3 is right on. My vacuums are $3 to start.
  7. T

    Small Town IBA Startup!?

    You could have written almost the same scenario that I operate in. Give me a call when you get a chance. 518-469-1319
  8. T

    Kondor KL2 Carriage Jam Fault

    I'll send you a picture I just took one of these carriages completely apart. The bearings are a sealed hub bearing similar to a car. The idler wheels are just like taking a car tire off and then the bearing is behind that.
  9. T

    Kondor KL2 Carriage Jam Fault

    That's a solid axle both sides should be doing the same thing. Have you raised it up does it spin freely? It's just an idler axle it's not a motor driven axle.
  10. T

    Kondor KL2 Carriage Jam Fault

    If you want to talk more you can give me a call 518-469-1319.
  11. T

    Kondor KL2 Carriage Jam Fault

    RaiseThe idler /prox axle in the air and make sure it rotates freely and you don't have any binding or bad bearings.
  12. T

    Kondor KL2 Carriage Jam Fault

    What makes you think they aren't making good contact? The whole weight of the carriage is on the rollers. Are the rollers spinning and the carriage not moving. A carriage jam is caused by the carriage obviously not moving at all or the computer thinks it's not moving because prox switches are...
  13. T

    Viewing Belanger Touch Screen Remotely On iPhone

    On my 1063 this is what I use. https://play.google.com/store/apps/details?id=com.glavsoft.rrviewerpro A 1063 is not a PC. TeamViewer won't work on it. It's a PLC touch screen.
  14. T

    Hexagon Ceiling Lights for Bays

    Yes in the arms I wired them into the OEM junction box.
  15. T

    Hexagon Ceiling Lights for Bays

    https://plashlights.com/ If it works in a boat environment it'll work in a car wash environment. I have them on the arms of my machine the OEM ones were junk at three times the money.
  16. T

    Belanger sonar

    Don't know if this would help anyone. After replacing numerous sonars I decided to take one apart. The sonar itself is a sealed unit with no moving parts so obviously no repair there. But the connector on the earlier units did not have an o-ring. The moisture would eventually get in there and...
  17. T

    Triple Foam Issues

    just came across this might help you?
  18. T

    Price Increase

    Went to 3 selections 10 years ago.Never looked back. Currently at $20 $16 $14.
  19. T

    Anybody tried Universal boartex brushes?

    I've used this one for 5 years, same hair. works great & lasts longer. no scratches no complaints. https://www.kleen-ritecorp.com/search.aspx?searchterm=FO1808-BTX
  20. T

    Contactor is acting up?

    Had one doing it intermittently because of a sticking pressure regulator. When the pressure went too high the draw was too much on the motor.
Top