Belanger parts

[Kittykind79]

Does anyone know where to get hubs for a Bellinger machine that aren't 200 bucks a piece the company I work for has eight machines and I don't even know how many hubs but seems like we're always replacing one and the price is outrageous

 

[Timmb]

What model machine?

 

[Kittykind79]

What model machine?

Freestyler, vector, saber, and kondor

 

[Earl Weiss]

If by "Hub" you are referring to the Piece that goes on the shaft of the brush that holds the cleaning material - Erie Brush makes hubs.

 

[Kittykind79]

No the hubs for the wheels, boom, arms and top wheel. They are wheel hubs

 

[Keno]

Probably get better response if you post a picture and/or part number you are looking for

 

[Flex- Wand]

I have 2 boom bearings, new . I have 2 butter fly motor an gear box for the arms one new in the belanger box an one 1 year old the blue pant still on it. I think the Drive motor an gear box is the same as the arms. I don't need them got rid of my sabers.

 

[Timmb]

It was posted here on the forum somewhere but I can't find it. I think it said and 83 Buick Skylark is what the bearing is. But I'm not sure I can't find the thread.

 

[Timmb]

This is what I found:

Hey also for you vector kondor owners just a FYI part #6100 which is the bearing used on butterfly is off a 83 Buick skylark ( frt wheel bearing) . You can get it at the auto parts store for around $50. Belanger cost is $180

 

[QuickshineCW]

For the non-driven bearing I used rear wheel bearings from 93-02' Saturn without wheel speed sensor. I bought the cheap ones from eBay and just gave them a couple coats of paint before going on the shelf. Had good luck with them.