Search results

I assume both functions use the same air solenoid?

If you screw the hose up into the machine where about an inch of the black outer hose is showing, the set screws hold the hose on just fine. I have never had a hose come out of a Fragramatics fragrance vac. The stand alone machine might be different. I know it’s a chore but a little elbow grease...

T This site is one of the newer setups already using the injectors. I am wondering why they didn’t use a 3 phase booster pump on these instead of the single phase. I have already replaced both the pumps on both u its and had to replace the capacitors on both motors as well. I am thinking about...

I prefer a walkable attic space :LOL:

To revisit this issue, the problem turned out to be the front boom safety transmitter eye would lose power when tilted toward the rear of vehicle while it was at the lowest point(bad wire)... I guess the program watches both sets of eyes regardless where the machine is at and will shut down the...

I assume each line has a check valve where they T together?

whats the facebook group called? I need to join

Does anyone have a water wizard with two step low pressure presoak? I am trying to figure out how its plumbed and if I can convert a machine to using a low pressure high alkaline presoak and low pressure low ph presoak.

It was the seals. Issue fixed

I know these pumps are discontinued and parts are no longer available but I still have 6 in service and a couple brand new pumps on the shelf. That being said, has anyone ever experienced one of these having a slight pulsation at the wand when trigger is pulled? It’s very similar to when a Cat...

3 all day long. the less confusing the better. Hell I know a tunnel wash that offers two packages and its the best tunnel around the area in my opinion.

Whenever I would have issues with the boom spraying the wrong way, it was always problems with the measurement eyes or the count prox. It would take on a mind of its own and do all kinds of crazy things.

It’s the small seals that come in the seal kit for the pump.

Are you positive the plunger seals are not bad and allowing water into the crankcase, making the oil overflow?

Pinched o-ring and back up ring on valve plug. That will make it suck air as well, causing bad noises.

They are specially modified nozzles by Petit. They drill out the slot on the nozzle somehow.

I will have to check on the other machine to make sure that the boom comes down in dry wash mode, but I did a dry wash and the boom did not come down on the machine that is currently not working correctly, however during a regular wash, the boom does come down at the front and rear. The fact...

https://www.zoro.com/dayton-encapsulated-timer-relay-1a-solid-state-6a857/i/G2034846/

The eyes I replaced were the hard wire type without the quick disconnect. I have learned not to use the quick connect eyes. They always mess up at the quick connection. I am getting error code 19 and 20, both of which refer to the boom safety eye (can eye) seeing an obstruction but the boom...

Having this exact issue now and have determined that the machine thinks the boom safety eyes are blocked at some point during the first few seconds on the high pressure pass at both the front and rear passes. Replaced the boom safety eyes as I was only getting a signal strength of 3 but with new...