Search results

I would start with the state/ town and see if they would allow it. They would probably make you have a meter on it so they could bill for sewer.

I don’t see anything about a blue wire

If you turn off the ball valve for that bay at the rinse tank and it stops, it probably the check valve under the tank for that bay.

Sent you a message

What state are you in?

Is this a fixed rail or adjustable carriage?

Do you happen to have his number?

Who is doing MEI repairs? The company I was sending people to isn’t cutting it!

Praying

If that’s the case sounds like you may need a bigger injector. What size injector are you using

Have you checked and cleaned the foam pad and screen in the manifold? If the wax functions work I would look at the check valves on the manifold and then the injectors on the ICS inside.

Did you take the guard off?

Are you talking about the valve out on the machine? That’s a normally open valve and doesn’t close for low pressure, only closes under high pressures. Have you cleaned the filter on the manifold? Does either presoak work correctly?

What is the gauge showing on the injection system it should be around 180-200 psi. I don’t think you have a clog in the arms if the other functions are working. The speed for the presoak is usually run around 14-18 for pump speed. I would start with taking off the 2 presoak check valves and...

How long will the rent be fixed at 2k including the utilities? How much do you expect it will cost you to get it up and running? Do you have the disposable income for getting this up and running?

180-200 Pump speed of 29 is definitely too high.

What is the pressure on the gauge that’s on the injection manifold when running presoak?

What pump speed are you at? Have you checked the check valves on the wall manifold for the presoak? Have you checked the screen and scrubby pad in the wall manifold? Was it working before and it just started doing this?

Are you using injectors or pumps?