A-OK Self Serve Manual

[pteaster]

Just got a few washes with A-OK Equipment. It is quite a bit different from
my Custom Kraft.

Anyone have any manuals or documentation on this equipment. A-OK website is still up and it looks like the design has stayed the same for quite a while.

Thanks

 

[Jim L.]

I’ve had their equipment in my 7/1 for over 13 years. Most of the owner’s manual refers to the initial equipment installation and operation of the automatic. If you have a specific question I may be able to help.

My distributor is still able to get A-OK parts from the original suppliers.

In what state are you located?

 

[pteaster]

I am in WA state. Was really just looking for a diagram with some identification of the different parts. That way when I need something, it will be a little easier to find the parts.

Thanks

 

[Jim L.]

Send me an e-mail address via private e-mail (click my name). I’ll scan what little I have and forward it to you.

 

[SanDiegoSS]

Heys guys, this is an old thread but I bought some washes with A-OK equipment and am looking for any manuals or cut sheets that are available. Mainly for the meter boxes. Thanks!

 

[MEP001]

The meter box is pretty standard. This should give you a really good idea of what does what.

https://images.kleen-ritecorp.com/Documents/ResourceLibrary/Coin%20Box%20Wiring/Meter%20Box%20Wiring%20Diagram.pdf

 

[Randy]

Heys guys, this is an old thread but I bought some washes with A-OK equipment and am looking for any manuals or cut sheets that are available. Mainly for the meter boxes. Thanks!

A-OK went out of business years ago. There stuff was pretty much just standard off the shelf car wash components, nothing really special. Back in the day we were a distributor for A-OK.

 

[Starrwash]

I have a complete manual for the Dynawash. That’s what I’m using and love the old school solid built wash.

 

[soonermajic]

I have a complete manual for the Dynawash. That’s what I’m using and love the old school solid built wash.

Where is uour Dynawash? Gorna friend looking at a 3SS/1 Dynawash. Looks old, but not worn out...

 

[Starrwash]

I am located in zumbrota Mn, there are several Dynawash machines in the area, some good service people from the old factory and also a friend of mine who rebuilds the old Dynawash machines

 

[bigjws]

I’ve also got an old Dynawash, installed in 1998… Still plugging along just fine!

 

[Starrwash]

I’ve also got an old Dynawash, installed in 1998… Still plugging along just fine!

Where are you located? I’m in zumbrota mn

 

[bigjws]

I’m outside Houston