$$$$ Acceptance Repair and Maint.

[pgrzes]

Does anyone know of a single source for acceptors of all makes for maintenance?? I have Coinco, Hamilton, Mei and Idx acceptors and validators, I have a bunch of spare units that I want to have serviced and would love to have 1 good source for everything???
Also do any of you have gauges calibrated?? Or just replace? They are only about $10 each, but looking at going over about 20-25 of them, I hate to just toss them if they can be calibrated.

 

[soapy]

Randy on the forum here can hook you up with most of the brands you mentioned.

 

[Buzzie8]

Betson has branches that will repair most of the brands mentioned. But try Randy first.

 

[MEP001]

Small gauges aren't meant to be serviced. Just getting it open without completely destroying it would make any effort to recalibrate them not worthwhile.

 

[mac]

If you replace gauges, be sure to get the liquid filled ones. they last longer.

 

[Greg Pack]

Another vote for Randy here...

Some people think he's kinda crotchety, but pay no attention to his sour disposition. His wife assures me he's a big pussycat.

 

[cwguy.com]

Hamilton

I thought only Randy fixed Hamilton stuff? I know he was cheaper then the other guy I were using.... from a valley or local.

 

[borumrm]

Does anyone know of a single source for acceptors of all makes for maintenance?? I have Coinco, Hamilton, Mei and Idx acceptors and validators, I have a bunch of spare units that I want to have serviced and would love to have 1 good source for everything???


I have used these guys several times...I have also purchased new validators and hoppers.

http://changemakercorp.com/

 

[Ric]

Does anyone know of a single source for acceptors of all makes for maintenance?? I have Coinco, Hamilton, Mei and Idx acceptors and validators, I have a bunch of spare units that I want to have serviced and would love to have 1 good source for everything???


I have used these guys several times...I have also purchased new validators and hoppers.

http://changemakercorp.com/

I've had good luck with them also.