Air shamee boom placement

[Noob]

I’m going to mount some air shamee booms in the coming days and was looking for some feedback on placement. The easiest place would be on the right wall with the boom falling backwards. My only concern is the HP rose. I afraid the vac hose may have difficulty working around the HP hose when it’s in the holder. What’s your guys thoughts?

 

[OurTown]

We mounted our Air Shammee booms so they would just go under the HP boom when away from the wall. It stops when it hits the HP hose coming out of its boom but works fine that way. You might have to move your mat holders because it looks like the hose and holster will land there.

 

[Earl Weiss]

If you are mounting in block avoid anchors and bolt them thru the wall with Fender Washers or a steel plate on the other side or back to back if using 2 and the bays will accommodate that and consider using Stainless all thread, nuts and washers

 

[Blanco]

Yes like others said mount below the HP boom and use STAINLESS threaded rod through the wall with plates and washers. Also do not level the mounting plate for the boom. You want it pitched down a little bit so gravity brings the boom back to the wall.

 

[edredtop]

I used the cheesy gun holder for a backing plate. Cut it to size and flattened on a press. Replaced with Air Logic gun and Hamel gun holder.