AMS hole in the wall
- Thread starter mr-gte
- Start date
Uncle Sam
Member
Multi-Vend Setting
mr-gte,
If you have a one line display (means you have a Sensit 1 system), then you can not do Multi-Vend. If you have a two line display (means you have a Sensit II system), then you can do Multi-Vend.
To set your machine to Multi-Vend, press the yellow button on the control board (do not close the door), using the "#" key toggle down to "MDB settings, press key "5", set to "on", save if asked, and close the door. Test the vendor to make sure it works as it should. You are in business.
If you have one of the older Sensit 1 vendors, it can be upgraded to a Sensit II system so you can have your multi-vend. Call us to arrange this upgrade if you need it.
Uncle Sam
mr-gte,
If you have a one line display (means you have a Sensit 1 system), then you can not do Multi-Vend. If you have a two line display (means you have a Sensit II system), then you can do Multi-Vend.
To set your machine to Multi-Vend, press the yellow button on the control board (do not close the door), using the "#" key toggle down to "MDB settings, press key "5", set to "on", save if asked, and close the door. Test the vendor to make sure it works as it should. You are in business.
If you have one of the older Sensit 1 vendors, it can be upgraded to a Sensit II system so you can have your multi-vend. Call us to arrange this upgrade if you need it.
Uncle Sam
